Re: GA-EP43-D3SL + E8400 - 4GHz?
I used the same as above, but here it is in full.
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: [Auto]
CPU Clock Ratio ..........................: 9
Fine CPU Clock Ratio.....................: N/A
CPU Frequency ...........................: 3.96GHz (9x440=3960MHz) (doesn't work at 9x420, or even 8x420)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 440MHz
PCI Express Frequency (Mhz) .........: 100MHz <--Always 100!!
C.I.A.2 .................................:[Disabled]
Advanced Clock Control
CPU Clock Drive...........................: 800
PCI Express Clock Drive.................: 800
CPU Clock Skew (ps)....................: Auto
MCH Clock Skew (ps)...................: Auto
DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: 400
System Memory Multiplier ..............: 2.00
Memory Frequency (Mhz) ..............: 880MHz
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time.............................5
tRCD ..............................................5
tRP'.............................................. ...5
tRAS.............................................. ..18
Advanced Timing Control
tRRD........................................... 5
tWTR.......................................... 7
tWR............................................ 7
tRFC........................................... 58
tRTP........................................... 6
Command Rate (CMD) ....................: 2
Channel A
Static tRead Value............................:12
tRD Phase0 Adjustment...................: Auto
tRD Phase1 Adjustment...................: Auto
tRD Phase2 Adjustment .................: Auto
tRD Phase3 Adjustment..................: Auto
Trd2rd(Different Rank)....................: Auto
Twr2wr(Different Rank)...................: Auto
Twr2rd(Different Rank)...................: Auto
Trd2wr(Same/Diff Rank)..................: Auto
Dimm1 Clock Skew Control...............: Auto
Dimm2 Clock Skew Control...............: Auto
Channel B
Static tRead Value..........................: 12
tRD Phase0 Adjustment...................: Auto
tRD Phase1 Adjustment...................: Auto
tRD Phase2 Adjustment .................: Auto
tRD Phase3 Adjustment..................: Auto
Trd2rd(Different Rank)....................: Auto
Twr2wr(Different Rank)...................: Auto
Twr2rd(Different Rank)...................: Auto
Trd2wr(Same/Diff Rank)..................: Auto
Dimm1 Clock Skew Control...............: Auto
Dimm2 Clock Skew Control...............: Auto
Motherboard Voltage ControlCPUMCH/ICHDRAMAdvanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]
When I try these it just get the fans spinning up for a few secs then no beep etc then it just restarts without changes and I get the warning screen when I go back into the settings page.
I used the same as above, but here it is in full.
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: [Auto]
CPU Clock Ratio ..........................: 9
Fine CPU Clock Ratio.....................: N/A
CPU Frequency ...........................: 3.96GHz (9x440=3960MHz) (doesn't work at 9x420, or even 8x420)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 440MHz
PCI Express Frequency (Mhz) .........: 100MHz <--Always 100!!
C.I.A.2 .................................:[Disabled]
Advanced Clock Control
CPU Clock Drive...........................: 800
PCI Express Clock Drive.................: 800
CPU Clock Skew (ps)....................: Auto
MCH Clock Skew (ps)...................: Auto
DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: 400
System Memory Multiplier ..............: 2.00
Memory Frequency (Mhz) ..............: 880MHz
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time.............................5
tRCD ..............................................5
tRP'.............................................. ...5
tRAS.............................................. ..18
Advanced Timing Control
tRRD........................................... 5
tWTR.......................................... 7
tWR............................................ 7
tRFC........................................... 58
tRTP........................................... 6
Command Rate (CMD) ....................: 2
Channel A
Static tRead Value............................:12
tRD Phase0 Adjustment...................: Auto
tRD Phase1 Adjustment...................: Auto
tRD Phase2 Adjustment .................: Auto
tRD Phase3 Adjustment..................: Auto
Trd2rd(Different Rank)....................: Auto
Twr2wr(Different Rank)...................: Auto
Twr2rd(Different Rank)...................: Auto
Trd2wr(Same/Diff Rank)..................: Auto
Dimm1 Clock Skew Control...............: Auto
Dimm2 Clock Skew Control...............: Auto
Channel B
Static tRead Value..........................: 12
tRD Phase0 Adjustment...................: Auto
tRD Phase1 Adjustment...................: Auto
tRD Phase2 Adjustment .................: Auto
tRD Phase3 Adjustment..................: Auto
Trd2rd(Different Rank)....................: Auto
Twr2wr(Different Rank)...................: Auto
Twr2rd(Different Rank)...................: Auto
Trd2wr(Same/Diff Rank)..................: Auto
Dimm1 Clock Skew Control...............: Auto
Dimm2 Clock Skew Control...............: Auto
Motherboard Voltage ControlCPUMCH/ICHDRAMAdvanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]
When I try these it just get the fans spinning up for a few secs then no beep etc then it just restarts without changes and I get the warning screen when I go back into the settings page.
Comment