Robust Graphics Booster___________ [turbo]
CPU Clock Ratio ____________ [8]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [450]
PCI Express Frequency (Mhz)_______ [100]
C.I.A. 2__________________________ [Disabled]
System Memory Multiplier (SPD)____ [2.40B] =1080MHz
DRAM Timing Selectable_______ SPD __ [Manual]
Performance Enhance =EXTREME
CAS Latency Time________________ 5
Dram RAS# to CAS# Delay_________ 5
Dram RAS# Precharge Delay_______5
Precharge Delay (tRAS)__________ 15
ACT to ACT Delay (tRRD)_________ 3
Rank Write to READ Delay________ 4
Write to Precharge Delay_________ 4
Refresh to ACT Delay______________ 48
Read to Precharge Delay__________ 3
Static tRead Value_______________7
Static tRead Phase Adjust________ AUTO
CPU/PCIEX Clock Driving Control [800mV]
CPU Clock Skew Control [normal]
GMCH Clock Skew Control [Normal]
System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.300V]
FSB OverVoltage Control___ [+0.05V]
(G)MCH OverVoltage Control [+0.200V]
These are current setting with Performance Enhance set to EXTREME and i have no problem passes all test and i game ALOT with no problems.Got this setting by mistake must have changed at some time when i was trying to tighten up timmings on ram not sure how long but a few weeks for sure. With this set to Extreme i was looking for some 1 to tell me what it does if anything.Also if i can run this at extreme should i be able to tweek memory more or does this have nothing to do with memory?I posted in the past to get advice on memory settings and seems like even a small change Performance Enhance=standard every thing gets unstabel Fast.What timmings in RAm make the difference i have been looking around and get different opions for different forums i read most differ in reasons and why.This being Gigabyte only for the most part and i have been abel to get current settings because of Amazing advice here so im back asking to see what you guys think.
CPU Clock Ratio ____________ [8]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [450]
PCI Express Frequency (Mhz)_______ [100]
C.I.A. 2__________________________ [Disabled]
System Memory Multiplier (SPD)____ [2.40B] =1080MHz
DRAM Timing Selectable_______ SPD __ [Manual]
Performance Enhance =EXTREME
CAS Latency Time________________ 5
Dram RAS# to CAS# Delay_________ 5
Dram RAS# Precharge Delay_______5
Precharge Delay (tRAS)__________ 15
ACT to ACT Delay (tRRD)_________ 3
Rank Write to READ Delay________ 4
Write to Precharge Delay_________ 4
Refresh to ACT Delay______________ 48
Read to Precharge Delay__________ 3
Static tRead Value_______________7
Static tRead Phase Adjust________ AUTO
CPU/PCIEX Clock Driving Control [800mV]
CPU Clock Skew Control [normal]
GMCH Clock Skew Control [Normal]
System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.300V]
FSB OverVoltage Control___ [+0.05V]
(G)MCH OverVoltage Control [+0.200V]
These are current setting with Performance Enhance set to EXTREME and i have no problem passes all test and i game ALOT with no problems.Got this setting by mistake must have changed at some time when i was trying to tighten up timmings on ram not sure how long but a few weeks for sure. With this set to Extreme i was looking for some 1 to tell me what it does if anything.Also if i can run this at extreme should i be able to tweek memory more or does this have nothing to do with memory?I posted in the past to get advice on memory settings and seems like even a small change Performance Enhance=standard every thing gets unstabel Fast.What timmings in RAm make the difference i have been looking around and get different opions for different forums i read most differ in reasons and why.This being Gigabyte only for the most part and i have been abel to get current settings because of Amazing advice here so im back asking to see what you guys think.
Comment