Hi there,
I'm having trouble finding a stable overclock. I'm running a q6600 and would like to hit 3.2ghz.
My system specs:
q6600 g0 vid 1.325
tuniq-120
4gb crucial ballistix tracer pc6400 - ram is rated to do 44412 @ 400 or 55515 @ 500, but I doubt it can do 1066 within temperature requirements.
8800 gt
antec 700w psu
Temps are not a problem, I never go above 59c.
Currently I am running stock settings, but I would like to achieve something amongst these lines: (these are the settings I have tried and had fail in p95)
Robust Graphics Booster Auto
CPU Clock Ratio x8 (or 9)
CPU Host Clock Control Disabled [Enabled]
CPU Host Frequency (MHz) 400 (or 356)
PCI Express Frequency (Mhz) 100
C.I.A. 2 disabled
System Memory Multiplier (SPD) 2x
DRAM Timing Selectable Manual
Performance Enhance = [Standard]
CAS Latency Time______5 [Auto]__________ ? 5 (or 4)
Dram RAS# to CAS# Delay____5[Auto]_____ ? 5 (or 4)
Dram RAS# Precharge Delay___5 [Auto]____? 5 (or 4)
Precharge Delay (tRAS)____15 [Auto]______ ? 15 (12)
ACT to ACT Delay (tRRD)___3 [Auto]______ ? auto
Rank Write to READ Delay___3 [Auto]_____ ? auto
Write to Precharge Delay_____6 [Auto]____ ? auto
Refresh to ACT Delay______40 [Auto]________ ? auto
Read to Precharge Delay_____3 [Auto]_____ ? auto
Static tRead Value______4 [Auto]_________ 1-31 (tried 7-12 all fail p95)
Static tRead Phase Adjust___0 [Auto]_____ 1-31 auto
System Voltage Control__Manual__
DDR2 OverVoltage Control__ Normal +0.3
PCI-E OverVoltage Control_ Normal
FSB OverVoltage Control___ Normal +0.1
(G)MCH OverVoltage Control Normal +0.2
CPU Voltage Control_______ Normal 1.435 (1.39 windows)
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [N/A]
x C4/C4E State Support..................: [N/A]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]
Can you guys see anything I may have missed in the settings? I'm really stumped here, the p35-ds3r I used to have was much easier to tweak. I suspect it has to do with the settings that I have left at auto. Unfortunately I'm not sure where to find information to set them based on the ram equipped. Would appreciate your help thanks.
I'm having trouble finding a stable overclock. I'm running a q6600 and would like to hit 3.2ghz.
My system specs:
q6600 g0 vid 1.325
tuniq-120
4gb crucial ballistix tracer pc6400 - ram is rated to do 44412 @ 400 or 55515 @ 500, but I doubt it can do 1066 within temperature requirements.
8800 gt
antec 700w psu
Temps are not a problem, I never go above 59c.
Currently I am running stock settings, but I would like to achieve something amongst these lines: (these are the settings I have tried and had fail in p95)
Robust Graphics Booster Auto
CPU Clock Ratio x8 (or 9)
CPU Host Clock Control Disabled [Enabled]
CPU Host Frequency (MHz) 400 (or 356)
PCI Express Frequency (Mhz) 100
C.I.A. 2 disabled
System Memory Multiplier (SPD) 2x
DRAM Timing Selectable Manual
Performance Enhance = [Standard]
CAS Latency Time______5 [Auto]__________ ? 5 (or 4)
Dram RAS# to CAS# Delay____5[Auto]_____ ? 5 (or 4)
Dram RAS# Precharge Delay___5 [Auto]____? 5 (or 4)
Precharge Delay (tRAS)____15 [Auto]______ ? 15 (12)
ACT to ACT Delay (tRRD)___3 [Auto]______ ? auto
Rank Write to READ Delay___3 [Auto]_____ ? auto
Write to Precharge Delay_____6 [Auto]____ ? auto
Refresh to ACT Delay______40 [Auto]________ ? auto
Read to Precharge Delay_____3 [Auto]_____ ? auto
Static tRead Value______4 [Auto]_________ 1-31 (tried 7-12 all fail p95)
Static tRead Phase Adjust___0 [Auto]_____ 1-31 auto
System Voltage Control__Manual__
DDR2 OverVoltage Control__ Normal +0.3
PCI-E OverVoltage Control_ Normal
FSB OverVoltage Control___ Normal +0.1
(G)MCH OverVoltage Control Normal +0.2
CPU Voltage Control_______ Normal 1.435 (1.39 windows)
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [N/A]
x C4/C4E State Support..................: [N/A]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]
Can you guys see anything I may have missed in the settings? I'm really stumped here, the p35-ds3r I used to have was much easier to tweak. I suspect it has to do with the settings that I have left at auto. Unfortunately I'm not sure where to find information to set them based on the ram equipped. Would appreciate your help thanks.
Comment