Thermaltake Armor Jr.
GA-EP45-DS3L f9 BIOS
Q6600 G0 stepping
Asus Silent Knight HSF
OCZ Reaper 4GB 1066 (OCZ2RPR10664GK)
Enermax 465w
8800 GTS 512mb
Vista 64-bit
I've read everything I can possible read in these forums tonight and have been messing with bios settings constantly. Before I get into any overclocking I would really like to be able to get my ram set at its correct settings. Problem there is whenever I set the standard timing controls to:
5-5-5-18 with MCH Core to 1.3 or 1.4
DRAM Voltage to 2.1v
the computer reboots 3 times and puts me back to the settings it worked with originally (5-7-7-20 or some crap). I followed LSD's settings for someone with a very similar setup to mine but still no luck. Any help would be greatly appreciated...hope I supplied the right info.
GA-EP45-DS3L f9 BIOS
Q6600 G0 stepping
Asus Silent Knight HSF
OCZ Reaper 4GB 1066 (OCZ2RPR10664GK)
Enermax 465w
8800 GTS 512mb
Vista 64-bit
I've read everything I can possible read in these forums tonight and have been messing with bios settings constantly. Before I get into any overclocking I would really like to be able to get my ram set at its correct settings. Problem there is whenever I set the standard timing controls to:
5-5-5-18 with MCH Core to 1.3 or 1.4
DRAM Voltage to 2.1v
the computer reboots 3 times and puts me back to the settings it worked with originally (5-7-7-20 or some crap). I followed LSD's settings for someone with a very similar setup to mine but still no luck. Any help would be greatly appreciated...hope I supplied the right info.
Comment