Hi, just bought a 780g Board. Current setup is:
GA-MA78GM-S2H Upgraded to F5
4850e CPU Boxed
2x1 GB Crucial Value RAM D9GMH
40GB Seagate SATA 2.5" and 160GB Samsung IDE HDD
Pioneer DVR112 DVD-Burner
System is not installed into a case. Just a power button connected to it, no speaker, no reset button no anything.
When first boot device set to cd, system loads os starts to install, but can't complete Vista setup. Hang during completing Setup (final setup step). It takes very long anyways to start installation. Expanding files takes very long. Hangs for about 5 minutes @ 0% !
XP starts installation, but after first reboot system freezes when cd boot timeout passes (the moment, where it switches from first to second boot device). Also tried IDE native mode and AHCI mode. Nothing helps. Any ideas what I could try?
GA-MA78GM-S2H Upgraded to F5
4850e CPU Boxed
2x1 GB Crucial Value RAM D9GMH
40GB Seagate SATA 2.5" and 160GB Samsung IDE HDD
Pioneer DVR112 DVD-Burner
System is not installed into a case. Just a power button connected to it, no speaker, no reset button no anything.
When first boot device set to cd, system loads os starts to install, but can't complete Vista setup. Hang during completing Setup (final setup step). It takes very long anyways to start installation. Expanding files takes very long. Hangs for about 5 minutes @ 0% !
XP starts installation, but after first reboot system freezes when cd boot timeout passes (the moment, where it switches from first to second boot device). Also tried IDE native mode and AHCI mode. Nothing helps. Any ideas what I could try?
Comment