ep45-ds3 e8400 @4.2ghz

[Lsdmeasap]

Re: ep45-ds3 e8400 @4.2ghz

Is that 555-12 at 990? If so you can try a higher trfc with lower Static, or higher trrd with higher static.... Or a mix of them both.

I can say for sure it would be better for you to start with most of the subtimings higher and then get Static tRead Value lower then start lowering the others. Static tRead Value has the MOST impact on performance/speeds so you want it lower First before anything else

[leogeddes]

Re: ep45-ds3 e8400 @4.2ghz

yeah your a good helper :P so is that about all i can do to make it faster or is ther any hope i could run 1190

[leogeddes]

Re: ep45-ds3 e8400 @4.2ghz

yes that was 555 12 990 if i uped dram volts would i have a higher chance of running 1190

[Lsdmeasap]

Re: ep45-ds3 e8400 @4.2ghz

Ya, you likely would. But what spec for voltage you see on the sticker is the warrantied amount. So if you fry it you would have to RMA it and hope it was not burnt internally and lie to them of course about the voltages used.

Some boards overvolt by default anyway so I doubt they would be able to say much unless you pumped 2.5 or so into them.

2.2 is the recommended max "Safe Range" for DDR2, when using 2.2 I always suggest a fan for sure.

using 2.3 and 2.4 is doable for most DDR2 but only for short periods and is not recommended at all for long term use.

2.2 is generally safe for most 2.1 spec'd ram, but please use a fan on the ram as it will be HOT

[leogeddes]

Re: ep45-ds3 e8400 @4.2ghz

yeah my ram is 2.1v rated so its sweet i got it booting at 4.2ghz at 1130ram at 555 15 and the same sub timings u sent me but it wont pass mem test any thoughts?

[leogeddes]

Re: ep45-ds3 e8400 @4.2ghz

also i have 3 fans on my ram and at the mo running 4ghz at 497x9 ram at 1068 tight timing past 18hours of prime and ram pass memtest fine :D

[Lsdmeasap]

Re: ep45-ds3 e8400 @4.2ghz

What?

HAHA you said it wont pass, then next post 2 minutes later said is passes for 18 hours

You been drinking tonight? HAHA J/K

[leogeddes]

Re: ep45-ds3 e8400 @4.2ghz

lol nah wont past at 4.2 on 1130 lol puff puff

[Lsdmeasap]

Re: ep45-ds3 e8400 @4.2ghz

So you stable at 4.2 1068 or what? Pass Pass

[leogeddes]

Re: ep45-ds3 e8400 @4.2ghz

im stable at 4ahz at 1068 lol

[Lsdmeasap]

Re: ep45-ds3 e8400 @4.2ghz

Then Push a little harder

[leogeddes]

Re: ep45-ds3 e8400 @4.2ghz

is that movie been released yet? lol i wanna see it u have good tastes lol
ill need to run looser timing to get 1130 @4.2 ay

[Lsdmeasap]

Re: ep45-ds3 e8400 @4.2ghz

Ahh it was just a screener/commercial to make fun of the real one.

Ya, that would be a cool show for sure if they made it, but I doubt they would ever be allowed to for copyright reasons.

Ya, have you tried 666-18 timings? That may get you there

[leogeddes]

Re: ep45-ds3 e8400 @4.2ghz

alright ill give it a goo now :)

[leogeddes]

Re: ep45-ds3 e8400 @4.2ghz

sad i had no luck but ohh well bak to 497x8.5 at 990 5 5 5 12