Guys, need help. I'm running raid 0 Gigabyte GA-EP35-DS3R board with ICH9R. I oopsed and booted with cmos "default" setting which took it of out Raid. It now says Volume o is "failed" and on member 0 "non-raid" and member 1 "member Disk". I've since changed cmos settings back as it was before(RAID). Still same problem. I know hard drives are good and data is still intact. I searched the web and read for hours but couldn't find a solution. How can I recover my Raid 0 setup.
Announcement
Collapse
No announcement yet.
GA-EP35-DS3R Raid problem
Collapse
X
-
Re: GA-EP35-DS3R Raid problem
You can't, sorry. RAID0 splits data in half in order to increase speed but lacks security.
Usually we use those RAID0 drives only for systems files and crucial data is stored away, securely.GA-Z97-D3H Windows Pro 8.1
i5-4690K + Corsair H90
Sapphire Radeon R7 240
16GB (2x8GB) DDR3 Corsair Vengeance Pro 2400MHz PC3 19200
Corsair CX750M
Samsung SSD 840 EVO 500 GB
Sharkoon VS-3V tower
Comment