GA-EP35-DS3R Raid problem

[Alien432]

Guys, need help. I'm running raid 0 Gigabyte GA-EP35-DS3R board with ICH9R. I oopsed and booted with cmos "default" setting which took it of out Raid. It now says Volume o is "failed" and on member 0 "non-raid" and member 1 "member Disk". I've since changed cmos settings back as it was before(RAID). Still same problem. I know hard drives are good and data is still intact. I searched the web and read for hours but couldn't find a solution. How can I recover my Raid 0 setup.

[svcglobal]

Re: GA-EP35-DS3R Raid problem

You can't, sorry. RAID0 splits data in half in order to increase speed but lacks security.
Usually we use those RAID0 drives only for systems files and crucial data is stored away, securely.

[Lsdmeasap]

Re: GA-EP35-DS3R Raid problem

Yeap, if you changed it back and it still fails you are out of luck other then buying RaidReconstructor program