Hi, I just got my new GA-EP35-DS3R. I have 2 problem with this motherboard.
The first problem. DDR2 Voltage: normal setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
+.1 setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
+.2 setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
+.3 setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
+.3 setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
+.4 setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
+.5 setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
+.6 setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
Is there a bug? I am using F3b Bios. My ram is rated for 1066 at 5-5-5-15 up to 2.3V. It's 4GB(2x2Gb).
Right now I am running at 1066 @ 5-5-5-15 with 1.88V. I want to increase the voltage for more speed! I do not know why the BIOS is not responding to the voltage increment setting.
2nd Problem: In windows, everytime I restart computer instead of shutdown, the motherboard shutdown and turn back on and shutdown and turn back on repeated for every 5 sec. It get stuck in a loop. I cann't get out of the loop unless I pull the power plug. I am aware of the DES loop problem but not this.
Oh btw, I am running my GO Q6600 at 3.2(356*9). 1.575V setting, BIOS read 1.52 droop to 1.47.
The first problem. DDR2 Voltage: normal setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
+.1 setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
+.2 setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
+.3 setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
+.3 setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
+.4 setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
+.5 setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
+.6 setting BIOS reading is 1.88, Hardware Monitor from CPUid say 1.88
Is there a bug? I am using F3b Bios. My ram is rated for 1066 at 5-5-5-15 up to 2.3V. It's 4GB(2x2Gb).
Right now I am running at 1066 @ 5-5-5-15 with 1.88V. I want to increase the voltage for more speed! I do not know why the BIOS is not responding to the voltage increment setting.
2nd Problem: In windows, everytime I restart computer instead of shutdown, the motherboard shutdown and turn back on and shutdown and turn back on repeated for every 5 sec. It get stuck in a loop. I cann't get out of the loop unless I pull the power plug. I am aware of the DES loop problem but not this.
Oh btw, I am running my GO Q6600 at 3.2(356*9). 1.575V setting, BIOS read 1.52 droop to 1.47.
Comment