Will a Q6600 Processor work with the beta software ?
Announcement
Collapse
No announcement yet.
GA-N680SLI-DQ6 rev 2 with a Q6600
Collapse
X
-
Re: GA-N680SLI-DQ6 rev 2 with a Q6600
Only when I put a Q6600 on the board it wont start but if I fit a E6850 it will
I did notice that the Q6600 is on the supported list and I have tested the Q6600 in another board and that works
Tim
Comment
-
Re: GA-N680SLI-DQ6 rev 2 with a Q6600
Well all I can say is this is a bit of junk.
Its not supporting the Q6600 has anyone else got it to work ?.
Mine is on its way back for a refund it wont boot with the Q6600 processor (It will boot if you have a E6850).Last edited by drbig; 10-27-2007, 07:00 AM.
Comment
-
Re: GA-N680SLI-DQ6 rev 2 with a Q6600
Wont post get power light flash on for 3 seconds fans spin but thats all change the processor for a E6850 and it will post put the Q6600 in and it wont.
Q6600 processor is ok as have it running in another board
Other than ram there is nothing else attached to the board.
Have tested it with FA bios and FBb bios same results
Comment
-
Re: GA-N680SLI-DQ6 rev 2 with a Q6600
yes
Tested with 1 stick and 2 stick and 4 sticks of ram
the only thing that would get it to post was to change the processor for the E6850 I have about and it would post with 1 /2 / 4 sticks of ram
But not too worry as the board has been returned to my supplier and have recived a refund
Comment
Comment