No announcement yet.

GA-N680SLI-DQ6 rev 2 with a Q6600

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GA-N680SLI-DQ6 rev 2 with a Q6600

    Will a Q6600 Processor work with the beta software ?

  • #2
    Re: GA-N680SLI-DQ6 rev 2 with a Q6600

    beta software,... you mean BIOS?

    Comment


    • #3
      Re: GA-N680SLI-DQ6 rev 2 with a Q6600

      Yes sorry BIOS

      Comment


      • #4
        Re: GA-N680SLI-DQ6 rev 2 with a Q6600

        Only when I put a Q6600 on the board it wont start but if I fit a E6850 it will


        I did notice that the Q6600 is on the supported list and I have tested the Q6600 in another board and that works


        Tim
        Last edited by drbig; 10-23-2007, 05:36 AM. Reason: typo

        Comment


        • #5
          Re: GA-N680SLI-DQ6 rev 2 with a Q6600

          Yes, you can use your Q6600 Processor with the beta BIOS. If you need please mail me.^^

          Comment


          • #6
            Re: GA-N680SLI-DQ6 rev 2 with a Q6600

            Thanks for that info

            Comment


            • #7
              Re: GA-N680SLI-DQ6 rev 2 with a Q6600

              Well all I can say is this is a bit of junk.

              Its not supporting the Q6600 has anyone else got it to work ?.

              Mine is on its way back for a refund it wont boot with the Q6600 processor (It will boot if you have a E6850).
              Last edited by drbig; 10-27-2007, 07:00 AM.

              Comment


              • #8
                Re: GA-N680SLI-DQ6 rev 2 with a Q6600

                Dear drbig

                Q6600 Should support this MB.
                http://www.gigabyte.tw/Support/Mothe...ProductID=2553
                Could you please let me know what happen? and what is your system?

                Comment


                • #9
                  Re: GA-N680SLI-DQ6 rev 2 with a Q6600

                  Wont post get power light flash on for 3 seconds fans spin but thats all change the processor for a E6850 and it will post put the Q6600 in and it wont.

                  Q6600 processor is ok as have it running in another board

                  Other than ram there is nothing else attached to the board.

                  Have tested it with FA bios and FBb bios same results

                  Comment


                  • #10
                    Re: GA-N680SLI-DQ6 rev 2 with a Q6600

                    Had you try clear CMOS?
                    And did you use 4 RAM?

                    Comment


                    • #11
                      Re: GA-N680SLI-DQ6 rev 2 with a Q6600

                      yes

                      Tested with 1 stick and 2 stick and 4 sticks of ram

                      the only thing that would get it to post was to change the processor for the E6850 I have about and it would post with 1 /2 / 4 sticks of ram


                      But not too worry as the board has been returned to my supplier and have recived a refund

                      Comment


                      • #12
                        Re: GA-N680SLI-DQ6 rev 2 with a Q6600

                        so if you use 2 ram will it root?

                        Comment


                        • #13
                          Re: GA-N680SLI-DQ6 rev 2 with a Q6600

                          nope nothing same problem but remove the q6600 processor and E6850 it will then post or root.

                          Thanks for you help but I have given up with this board

                          Comment


                          • #14
                            Re: GA-N680SLI-DQ6 rev 2 with a Q6600

                            can your q6600 pass in other MB?

                            Comment

                            Working...
                            X