I have 2 setups, one is Msi Gaming3 h97 with 4460, another, more recent, is Asrock Fatality Killer with 4460
Both have latest bios. on Msi microcode is 1c, on Asrock 1a. i use HW info to read that. Msi Haswell runs in full load Prime test on 0.926 volts, Asrock is on 1.012. One core only slightly more on both.
HW monitor reports that in idle Msi is only 4,5watt package, Asrock is around 7watt. full load msi is 10watt more (sometimes). Msi lowers voltage to 0.008 (0.20 average), Asrock board 0.7. Is that board not reading Haswell voltage right because as far as i understand all Haswells should be the same, 0.7volts and internally lower (like Msi board). Msi is also on 0.7 when i read VID voltage in HW monitor, but vcore is 0.008 or 0.020. Vcore on Asrock is fixed on 0.8.
HW info reports that Msi haswell has tdp long duration 105watt 16 sec, short duration 120watt 2.44ms (unlimited)
Asrock is 84 watt 8sec, 105 watt 2.44 ms (unlimited)
I have same cooler in both, evo 212 with Scythe fan. Asrock is 54c in full load, Msi only 47c. if set both fans on same speed (1450rpm).
Gpu in idle not to interfere. Maybe heatsink paste is not ok on Asrock (too much) i will check that in couple of days.
so...
How is Msi with more tdp cooler?
Is asrock 84watt 8 sec limit ok? its 84 watt cpu, what is that 8 second limit?
Is TDP difference microcode issue?
I dont understand too much here, please can someone explain
Microcode is not the same... is that motherboard issue? Both cpus are same revision
Why is Msi board reading vcore as low as 0.008. VID is the same on both (0.7)
Asrock board has 1a microcode, is that older then 1c on Msi. Will we get update?
I can add pictures if needed
Thank you!
Both have latest bios. on Msi microcode is 1c, on Asrock 1a. i use HW info to read that. Msi Haswell runs in full load Prime test on 0.926 volts, Asrock is on 1.012. One core only slightly more on both.
HW monitor reports that in idle Msi is only 4,5watt package, Asrock is around 7watt. full load msi is 10watt more (sometimes). Msi lowers voltage to 0.008 (0.20 average), Asrock board 0.7. Is that board not reading Haswell voltage right because as far as i understand all Haswells should be the same, 0.7volts and internally lower (like Msi board). Msi is also on 0.7 when i read VID voltage in HW monitor, but vcore is 0.008 or 0.020. Vcore on Asrock is fixed on 0.8.
HW info reports that Msi haswell has tdp long duration 105watt 16 sec, short duration 120watt 2.44ms (unlimited)
Asrock is 84 watt 8sec, 105 watt 2.44 ms (unlimited)
I have same cooler in both, evo 212 with Scythe fan. Asrock is 54c in full load, Msi only 47c. if set both fans on same speed (1450rpm).
Gpu in idle not to interfere. Maybe heatsink paste is not ok on Asrock (too much) i will check that in couple of days.
so...
How is Msi with more tdp cooler?
Is asrock 84watt 8 sec limit ok? its 84 watt cpu, what is that 8 second limit?
Is TDP difference microcode issue?
I dont understand too much here, please can someone explain
Microcode is not the same... is that motherboard issue? Both cpus are same revision
Why is Msi board reading vcore as low as 0.008. VID is the same on both (0.7)
Asrock board has 1a microcode, is that older then 1c on Msi. Will we get update?
I can add pictures if needed
Thank you!
Comment