Hi there,
Been having an issue when trying to enter the BIOS or UEFI. I receive an error or debug code of A6/A9 as soon I press F2 or Del(accompanied with 1 short beep), and the display freezes shortly after. If I boot the rig normally and don't press any keys, it boots fine into Win 8.1/64.
I'm just looking for some input on what methods I should take to fix this problem to allow me to enter UEFI or BIOS successfully. I've read some methods relating to AsrockZ97, where it suggests to do a BIOS update.
But so far I've only done what my mobo manual suggested when A6 Debug code arrive. A0-A7 codes are described to be a "Problem related to IDE and SATA devices. Please re-install IDE and SATA devices. If the problem still exists, please clear CMOS and try removing all SATA devices."
After re-installing all SATA devices and clearing the CMOS I still received the same errors mentioned above.
This is my rig:
-AsRock z97 Extreme6/ac
-Intel i7-4790k 4.0Ghz
-Corsair H100i cooling
-Gskill 2x8Gb ram
- 2xG1 Winforce GTX 970s
-HX750 psu
-Seagate 3TB HDD
-Samsung 128Gb SSD
Thanks for the read!
All input would be greatly appreciated.
Been having an issue when trying to enter the BIOS or UEFI. I receive an error or debug code of A6/A9 as soon I press F2 or Del(accompanied with 1 short beep), and the display freezes shortly after. If I boot the rig normally and don't press any keys, it boots fine into Win 8.1/64.
I'm just looking for some input on what methods I should take to fix this problem to allow me to enter UEFI or BIOS successfully. I've read some methods relating to AsrockZ97, where it suggests to do a BIOS update.
But so far I've only done what my mobo manual suggested when A6 Debug code arrive. A0-A7 codes are described to be a "Problem related to IDE and SATA devices. Please re-install IDE and SATA devices. If the problem still exists, please clear CMOS and try removing all SATA devices."
After re-installing all SATA devices and clearing the CMOS I still received the same errors mentioned above.
This is my rig:
-AsRock z97 Extreme6/ac
-Intel i7-4790k 4.0Ghz
-Corsair H100i cooling
-Gskill 2x8Gb ram
- 2xG1 Winforce GTX 970s
-HX750 psu
-Seagate 3TB HDD
-Samsung 128Gb SSD
Thanks for the read!
All input would be greatly appreciated.
Comment