Hi,
Setup:
mb Asrock Z87m Extreme4
cpu I7-4770K, BX80646I74770K
memory KHX16C10B1K2/16X (kit of 2pcs 8GB)
psu CTG-550C
MB came with bios 1.60 (flashed to 1.60C *after* the release bios would not post at XMP)
I am just starting to put computer together and I always assemble MB+CPU+MEMORY+PSU only and start with memtest. Board posts with default settings (DDDR1333) but won't post with XPM profile.
I have two different kits. Same problem. Should be compatible (according to supported list).
This MB won't post even with only one dimm installed at XMP profile. I have tried slots A1 & A2 (and started with recommended A2 + B2 configuration).
I did try different PSU
I did try with DGPU.
I did use this type of memory (not these individual dimms, but this part no.) in the summer with Asrock Z87M PRO4 boards with success.
Do you have any suggestions?
Markku
Setup:
mb Asrock Z87m Extreme4
cpu I7-4770K, BX80646I74770K
memory KHX16C10B1K2/16X (kit of 2pcs 8GB)
psu CTG-550C
MB came with bios 1.60 (flashed to 1.60C *after* the release bios would not post at XMP)
I am just starting to put computer together and I always assemble MB+CPU+MEMORY+PSU only and start with memtest. Board posts with default settings (DDDR1333) but won't post with XPM profile.
I have two different kits. Same problem. Should be compatible (according to supported list).
This MB won't post even with only one dimm installed at XMP profile. I have tried slots A1 & A2 (and started with recommended A2 + B2 configuration).
I did try different PSU
I did try with DGPU.
I did use this type of memory (not these individual dimms, but this part no.) in the summer with Asrock Z87M PRO4 boards with success.
Do you have any suggestions?
Markku
Comment