Dear Sirs,
I have obtained a newer motherboard AsRock G41MH/USB3 R2.0, but have a quick question before putting it all together and powering it up..
Current Specs:
1x Weston Digital 1TB sata drive,
1x Intel 775 2Quad Q6700 2.66Mhz
1x Powercool 850 Watt 80+ PSU
2x 4GB DDR3 RAM
1x PCIe 5 USB v3.0 Ports
1x 3.5" Floppy and Multi Card Reader Combo
2x DVD RW's
I have a 14" Intake fan (4-pin), 92mm Exhaust fan (4-pin), and the CPU fan (3-pin)
Here's the link for the 'mobo': ASRock > G41MH/USB3 R2.0
And, here's a link to the mobo manual: ftp://europe.asrock.com/manual/G41MHUSB3%20R2.0.pdf
Page 11 of the 'pdf' file shows the 'mobo' diagram, which leads me to my question...
Please can a GURU advise me if I could use the Power Fan Connector (PWR_FAN1), for the CPU fan as they are both 3-pin as then I could control all fans via the software it come with and possibly SpeedFan.
Thank you in advance of reading my thread and posting a reply.
Regards, Jonathan
I have obtained a newer motherboard AsRock G41MH/USB3 R2.0, but have a quick question before putting it all together and powering it up..
Current Specs:
1x Weston Digital 1TB sata drive,
1x Intel 775 2Quad Q6700 2.66Mhz
1x Powercool 850 Watt 80+ PSU
2x 4GB DDR3 RAM
1x PCIe 5 USB v3.0 Ports
1x 3.5" Floppy and Multi Card Reader Combo
2x DVD RW's
I have a 14" Intake fan (4-pin), 92mm Exhaust fan (4-pin), and the CPU fan (3-pin)
Here's the link for the 'mobo': ASRock > G41MH/USB3 R2.0
And, here's a link to the mobo manual: ftp://europe.asrock.com/manual/G41MHUSB3%20R2.0.pdf
Page 11 of the 'pdf' file shows the 'mobo' diagram, which leads me to my question...
Please can a GURU advise me if I could use the Power Fan Connector (PWR_FAN1), for the CPU fan as they are both 3-pin as then I could control all fans via the software it come with and possibly SpeedFan.
Thank you in advance of reading my thread and posting a reply.
Regards, Jonathan
Comment