z77 OC Formula problem

[fluek66]

Hi
I finally got my asrock z77 oc formula:) but im having a few problems with the rapid oc and the timing configurator.
Every time i open it up its not complete there is bits missing
I have deleted both and reinstalled but get the same problem. im also on the latest Bio 2.00
Anyone one else having this happen or have a fix???

[parsec]

Re: z77 OC Formula problem

Discrete or on board graphics? What CPU and video card and driver, if used? Using Lucid Virtu?

Installed from disk with the board, or downloaded from ASR?

A new build? Any drivers or software you may not have installed?

Not much detail in your system specs.

[- wardog -]

Re: z77 OC Formula problem

Not much detail in your system specs.

Are your video drivers pushing the monitor at it's recommended resolution and timing?

[- wardog -]

Re: z77 OC Formula problem

And while probably not applicable here, there is a newer than came on the support cd, release of Formula Drive on ASRocks Z77 OC Formula Downloads section.

[fluek66]

[ASRock TSD - Emily]

Re: z77 OC Formula problem

Hi fluek66,

Please kindly provide the detailed system config. for me including of memory model name, BIOS settings, OC settings etc...

And please describe the symptom in detail, I will check this issue.

Thank you very much!

Have a nice day
ASRock TSD
Emily

[fluek66]

Re: z77 OC Formula problem

Hi Emily

Memory is G skillripjaws-x 8gb 2133 f3-17000cl11d-8gbxl
cpu is i7 2600k @3700
Bios is all standed i have changed nothing yet. 2.00 which i downloaded from the Asrock site
Oc setting are standed have not changed anything yet

The rapid oc and the timing configurator when i open them up there are bits missing.I can only see half of the timming configurator just like in the pic that i have attached

Many thanks for ur help

[ASRock TSD - Emily]

Re: z77 OC Formula problem

Hi fluek66,

I couldn't understand the symptom of "there are bits missing", please kindly describe it in detail.
I will check it again.

Thanks for your help!

Have a nice day
ASRock TSD
Emily

[fluek66]

Re: z77 OC Formula problem

Hi again

Can u see the pic i attched?????
when i click to open the timing configurator i can only see half of it the other half is missing and the same with the rapid oc i click to open and only half of it opens

[profJim]

Re: z77 OC Formula problem

Please post a larger picture using JPG or PNG format.
Make sure that the picture width is about 1024 pixels wide so that we can easily see which option fields are missing.
Using the Insert Image icon, you can upload the picture from your system or use the picture's web address from a website.

I can right click on your image and copy it into my image editing program and see what the problem is.

[ASRock TSD - Emily]

Re: z77 OC Formula problem

Hi fluek66,

Thanks for the explanation!
I understand it.
But I don't have the same memory on our side, I did the test with Geil DDR3-2133 4GBx2 memory.
I couldn't see the symptom.
I will try to borrow the memory from G.Skill for checking this issue.

Please kindly also tell me which OS version do you use. (Win7 64bit or 32bit)
If disable SLI or use onboard graphics, did the symptom still occur?
I would like to check if this issue is related to VGA card and SLI tech.

Thanks!

Have a nice day
ASRock TSD
Emily

[fluek66]

Re: z77 OC Formula problem

HI
Im using windows 7 64bit
I have disabled both video cards and used the on board graphics and same problem:(
Also disabled sli and same problem aswell

[ASRock TSD - Emily]

Re: z77 OC Formula problem

Hi fluek,

I use the memory module to do the test under Windows 7 64bit, but I still cannot see the symptom.
Please kindly tell me below information.
1. Detailed system config. including monitor, HDMI output or DVI output.
2. Did you adjust other settings under BIOS? Or you only set CPU ratio at [37].
3. The version of Rapid OC and "Timing Configurator".
4. The screen resolution you set.

I'll double check this issue.

Thanks for your help!

Have a nice day
ASRock TSD
Emily

[fluek66]

Re: z77 OC Formula problem

Hi Emily

1.i7 2600k,Memory is G skillripjaws-x 8gb 2133 f3-17000cl11d-8gbxl , Galaxy gtx670 sli, i have tried hdmi and dvi and same problem

2. sorry i wasnt running at 3700 its at std 3.4, all BIOS setting are std.

3.Rapid OC ver:1.0.16 and TimingConfigurator ver:1.0.10

4.monitor is running at 1980 x 1080

[havasuphto]

Re: z77 OC Formula problem

And while probably not applicable here, there is a newer than came on the support cd, release of Formula Drive on ASRocks Z77 OC Formula Downloads section.

I just checked the Asrock download page for the OC Formula, and found all the software there was dated around August 2012. Care to share with me where there is a more current version of the Formula drive software(link would help)?