Hi,
I am about to get H67M and a i3 2105 which is very new I see from the Asrock site that I need BIOS 1.4 (3/8/2011) which is odd because the only changes in 1.4 are a modification to the boot logo. BIOS 1.5 (6/24/2011) has Update CPU code.
So what happens if I get a board with a old BIOS that does not support the i3 2105, will I be able to boot and DOS upgrade the BIOS or will it not boot?
I see there is a HDMI_SPDIF connector on the board, with does this provide an electrical spif signal that I can simply use to provide an electrical rca digital out to go into a exteral stero DAC?
Will this memory be OK? http://www.valueram.com/datasheets/KVR1333D3N9K2_8G.pdf
Sorry about the questions but if it will not boot with a 2105 I am stuffed as I have no other 1155 cpus.
Thanx
Paul
I am about to get H67M and a i3 2105 which is very new I see from the Asrock site that I need BIOS 1.4 (3/8/2011) which is odd because the only changes in 1.4 are a modification to the boot logo. BIOS 1.5 (6/24/2011) has Update CPU code.
So what happens if I get a board with a old BIOS that does not support the i3 2105, will I be able to boot and DOS upgrade the BIOS or will it not boot?
I see there is a HDMI_SPDIF connector on the board, with does this provide an electrical spif signal that I can simply use to provide an electrical rca digital out to go into a exteral stero DAC?
Will this memory be OK? http://www.valueram.com/datasheets/KVR1333D3N9K2_8G.pdf
Sorry about the questions but if it will not boot with a 2105 I am stuffed as I have no other 1155 cpus.
Thanx
Paul
Comment