I just received my Corsair Force GT 120GB SSD in today. I unboxed it and connected and started doing some test but not all the test have been completed. Here is a run down of some of the test that I have done or will be doing along with hardware for the test and how I will be doing the tests.
Hardware
X58A-OC i7-920 Overclocked @ 4.2Ghz HT disabled
Corsair Force GT 120GB SSD FW 1.3.3
OS Win7 EntSP1x64
Tests
(Hardware)
1. Marvell 9182 Sata3 ports in AHCI mode
2. Intel Sata2 ports in AHCI mode
(Software)
1. ATTO Disk Benchmark
2. AS SSD Benchmark
3. CrystalDiskMark
(Method)
1. Test the drive on both ports in a empty state.
2. Test the drive on both ports windows fully tweaked for SSD.
3. Test the drive on both ports in a 50% full state.
4. Test the drive on both ports as the OS drive.
5. Do all test with out and with Marvell driver installed?
If anyone has any suggestions or comments on the software, methods of these test please feel free to. I am open to ideas.
Hardware
X58A-OC i7-920 Overclocked @ 4.2Ghz HT disabled
Corsair Force GT 120GB SSD FW 1.3.3
OS Win7 EntSP1x64
Tests
(Hardware)
1. Marvell 9182 Sata3 ports in AHCI mode
2. Intel Sata2 ports in AHCI mode
(Software)
1. ATTO Disk Benchmark
2. AS SSD Benchmark
3. CrystalDiskMark
(Method)
1. Test the drive on both ports in a empty state.
2. Test the drive on both ports windows fully tweaked for SSD.
3. Test the drive on both ports in a 50% full state.
4. Test the drive on both ports as the OS drive.
5. Do all test with out and with Marvell driver installed?
If anyone has any suggestions or comments on the software, methods of these test please feel free to. I am open to ideas.
Comment