Announcement

Collapse
No announcement yet.

GA-7N400 pro2 & TT Silent Boost

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GA-7N400 pro2 & TT Silent Boost

    Does the Gigabyte GA-7N400 Pro2 have space for a Thermaltake A1889 Silent Boost ??

  • #2
    I don't have the GA-7N400 pro2, but I do have a TT Silent Boost. After looking at the attached pic of your mobo I can almost guarantee that it will fit without a problem.

    *btw, "Help" is a very poor thread title so I have changed it. Next time try to put a little thought into it.

    Comment


    • #3
      btw, that image is not a ga-7n400. This is
      http://www.giga-byte.com/MotherBoard...400%20Pro.htm#

      Comment


      • #4
        Originally posted by None120
        btw, that image is not a ga-7n400. This is
        http://www.giga-byte.com/MotherBoard...400%20Pro.htm#
        that is where I pulled the pic from that I posted. look at the page you just linked to, the pic above and the pic on that page are one in the same. if your mobo doesn't look like that, you either have a different version or gigabyte has goofed on their site. The link below is the pic I just posted, look at the file name.

        http://www.giga-byte.com/Motherboard...pro_10_big.jpg

        Comment


        • #5
          its not the same, just close. Take a look at your pic around the cpu and the pic on the link.

          Comment


          • #6
            Originally posted by None120
            its not the same, just close. Take a look at your pic around the cpu and the pic on the link.
            Hes right they arent the same, looks just to be different revisions of the same mobo tho

            Comment


            • #7
              Yep same board but different revisions (boy they certianly did a make over durin' the revision though).

              Comment


              • #8
                Okay none, here's my best judgment for you, i'll say yes it does fit (if you havent mounted one already) because i bought a volcano 12 for the exact same 7n400 pro2. it was almost too tight, but it fits nicely. i think it might be pushing on a capacitor a little bit, but nothing even close to damaging. heh, and i would highly suggest the silent, because mine cranks out the sound. >.<

                hope everything works okay.

                Comment

                Working...
                X