ok guys. first off i have a dfi nf4 sli d mobo, just for reference. i just upgraded my previous antec sp500 to a tp550 so i could get my sli 7800gtxs going. when i installed the new psu and the new card in and went to boot up the computer, everything powered up except the monitor. the computer itself was runing, but for some reason the monitor wasn't recieving anything. any ideas? bfg tech didn't have any. so i tried swaping out the cards and messed with monitor cables and still no luck, double checked everything, even cleared out the cmos, but nothing. so i reverted back to my old power supply removed the usb recieves that hook up to my monitor out and the computer started right up. although i think it's worht nothing that the old sp500 has an additional 4 pin power cnonnector that hooks into the mobo, where as the tp550 just has the large 20 or w/e its connector is. so, i'm wondering what you guys might think my incompatibilty or issue might be. also, the new psu, the tp550, is not modular like my old psu. and the way the computer was wired up, the two 120 mm fans and the zalman cpu fan were all wired into one hookup for the psu. unfortunately, my new psu doesn't have the right kind of hookup for this. the way the fans are wired up, they need one connector that has the pins covered by a hookin thing, i think it's called a female or something. where the fan power would go inside the one from the psu, if that makes any sense. i'll try to post pics to make this clearer later on. so, do you know of anywhere i coudl get a calbe splitter or anything without having to buy another psu. thanks a lot guys,
josh
josh
Comment