can I quizz you or anyone else who may be able to offer some assistance some more ?
I have been looking a little into overclocking my system and I see that in the user manual it says to overclock i should set the jumpers to jumperfree mode, jumperfree mode is the default mode as far as I'am aware anyway.
SO,,,,,,,,
I've adjusted the bios cpu/pci freq to the max that the system is stable with, the original default setting was 133/33x18=2.4ghz and now its at 142/36 x the cpu multiple freq (18)= 2.56ghz,right ???,I have run benchmark tests and it appears that the machine is running at this new speed, any higher and it was just crashing out, so far so good.
Anyway,,,,,
Now the ram is the thing in question, I have noticed people in the forums talking of overclocking the ram etc and I noticed that someone posted and mentioned something about 133 and 166 fsb when you were talking about the ram. Does this mean that I can change (with cooling etc) the 142 setting that I have just now up to 166x18=2988 ghz ? thats a massive jump !!!!
I think thats what you mean, isnt it ????
Ok next thing,,,,
According to my asus manual I can change jumper settings to suit my setup, it lists different permatations, heres some examples, cpu 100mhz-dram100mhz....cpu133mhz-rdram166mhz....cpu100mhz-rdram200mhz... and so on... those are just random examples.
What I'am trying to figure out now is,,, do I need to adjust these jumpers at all or will my ram be running at full speed or am I barking up the wrong tree altogether, I could move a switch to cpu133-dram166 for example but am I actually going to do anything anygood ????
I appreciate your time if you can help.
:cheers: :cheers: :cheers: :cheers:
I have been looking a little into overclocking my system and I see that in the user manual it says to overclock i should set the jumpers to jumperfree mode, jumperfree mode is the default mode as far as I'am aware anyway.
SO,,,,,,,,
I've adjusted the bios cpu/pci freq to the max that the system is stable with, the original default setting was 133/33x18=2.4ghz and now its at 142/36 x the cpu multiple freq (18)= 2.56ghz,right ???,I have run benchmark tests and it appears that the machine is running at this new speed, any higher and it was just crashing out, so far so good.
Anyway,,,,,
Now the ram is the thing in question, I have noticed people in the forums talking of overclocking the ram etc and I noticed that someone posted and mentioned something about 133 and 166 fsb when you were talking about the ram. Does this mean that I can change (with cooling etc) the 142 setting that I have just now up to 166x18=2988 ghz ? thats a massive jump !!!!
I think thats what you mean, isnt it ????
Ok next thing,,,,
According to my asus manual I can change jumper settings to suit my setup, it lists different permatations, heres some examples, cpu 100mhz-dram100mhz....cpu133mhz-rdram166mhz....cpu100mhz-rdram200mhz... and so on... those are just random examples.
What I'am trying to figure out now is,,, do I need to adjust these jumpers at all or will my ram be running at full speed or am I barking up the wrong tree altogether, I could move a switch to cpu133-dram166 for example but am I actually going to do anything anygood ????
I appreciate your time if you can help.
:cheers: :cheers: :cheers: :cheers:
Comment