Re: Help to setup Q9550 & GA EP43T-USB3 to the top!
Please post full settings and a screen capture as described in step 4 of this post.
Please post full settings and a screen capture as described in step 4 of this post.
Motherboard:Gigabyte Model:EP43T-USB3 Rev#:1.0 Bios Version:F2 Rev:A3 01/07/2010 Cpu:Intel Core2Quad Q9550 @ 2,83GHz Ram: Kingston KHX1600C8D3K2/4GX(http://www.testfreaks.com/blog/review/kingston-kyperx-ddr3-4gig-memory-kit-1600mhz-khx1600c8d3k24gx-1-65v/ ) Power Supply Unit:CORSAIR TX750 MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster -------------- : [Auto] CPU Clock Ratio ---------------------- : [7x] Fine CPU Clock Ratio ----------------- : [0.5] CPU Frequency ---------------------: 3GHz(400x7.5) Clock Chip Control Standard Clock Control CPU Host Clock Control --------------- : [Enabled] CPU Host Frequency (Mhz) --------------: [400] PCI Express Frequency (Mhz) ---------- : [100] C.I.A.2 ------------------------------ : [Disabled] Advanced Clock Control ------- [Press Enter] CPU Clock Drive ---------------------- : [800mV] PCI Express Clock Drive -------------- : [800mV] CPU Clock Skew (ps) ------------------ : [0] MCH Clock Skew (ps) ------------------ : [0] DRAM Performance Control Performance Enhance ------------------- : [Standard] Extreme Memory Profile --- (X.M.P.) --- : [Profile1] (G)MCH Frequency Latch ---------------- : [Auto] System Memory Multiplier -------------- : [3.33D] Memory Frequency (Mhz) ---------------- : [1333] DRAM Timing Selectable ---------------- : [Manual] Standard Timing Control CAS Latency Time -------- 9 ---------- : [6] tRCD ------------------- 9 ---------- : [6] tRP --------------------- 9 ---------- : [6] tRAS ------------------- 24 ---------- : [18] Advanced Timing Control tRRD ------------------- 4 ---------- : [Auto] 5 tWTR ------------------- 5 ---------- : [Auto] 6 tWR --------------------- 10 ---------- : [Auto] 12 tRFC ------------------- 74 ---------- : [Auto] 88 tRTP ------------------- 5 ---------- : [Auto] 6 Command Rate (CMD) -------------------- :0 Channel A Static tRead Value --------------------- :8 [Auto] tRD Phase0 Adjustment ------------------ :0 [Auto] <-- leave this and below set to AUTO tRD Phase1 Adjustment ------------------ :0 [Auto] tRD Phase2 Adjustment ------------------ :0 [Auto] tRD Phase3 Adjustment ------------------ :0 [Auto] Trd2rd(Different Rank) ----------------- :8 [Auto] Twr2wr(Different Rank) ----------------- :8 [Auto] Twr2rd(Different Rank) ----------------- :7 [Auto] Trd2wr(Same/Diff Rank) ----------------- :9 [Auto] Dimm1 Clock Skew Control --------------- : [Auto] ps Dimm2 Clock Skew Control --------------- : [Auto] ps Channel B Static tRead Value --------------------- :8 [Auto] tRD Phase0 Adjustment ------------------ :0 [Auto] <-- leave this and below set to AUTO tRD Phase1 Adjustment ------------------ :0 [Auto] tRD Phase2 Adjustment ------------------ :0 [Auto] tRD Phase3 Adjustment ------------------ :0 [Auto] Trd2rd(Different Rank) ----------------- :8 [Auto] Twr2wr(Different Rank) ----------------- :8 [Auto] Twr2rd(Different Rank) ----------------- :7 [Auto] Trd2wr(Same/Diff Rank) ----------------- :9 [Auto] Dimm1 Clock Skew Control --------------- : [Auto] ps Dimm2 Clock Skew Control --------------- : [Auto] ps Motherboard Voltage Control CPU Voltage Types------------ Normal -------- Current ----- Load-Line Calibration ----------------- : [Disabled] CPU Vcore --------------- 1,22500V ---- : 1,33125V CPU Termination --------- 1,2V ----- : 1,2V CPU PLL ----------------- 1,550V ----- : [Auto] CPU Reference ----------- 0,805V* ----- : [Auto] CPU Reference2 ---------- ?.???V* ----- : [Auto] MCH/ICH MCH Core ---------------- 1,100V ------- : 1,24V MCH Reference ----------- 0,760V ------- : [Auto] MCH/DRAM Ref ------------ ?????V ------ : [Auto] ICH I/O ----------------- 1,550V ------- : [Auto] ICH Core ---------------- 1,100V ------- : [Auto] DRAM DRAM Voltage ------------ 1,500V ------- : 1,7V DRAM Termination -------- 0,750V ------- : [Auto] Channel A Reference ----- ?.???V ------- : [Auto] Channel B Reference ----- ?.???V ------- : [Auto] Advanced Settings Limit CPUID Max. to 3 ------------------ : [Disabled] No-Execute Memory Protect -------------- : [Enabled] CPU Enhanced Halt (C1E) ---------------- : [Disabled] C2/C2E State Support ------------------- : [Disabled] x C4/C4E State Support ----------------- : [Disabled] CPU Thermal Monitor 2 (TM2) ------------ : [Enabled] CPU EIST Function --------------------- : [Disabled] Virtualization Technology -------------- : [Disabled] Integrated Peripherals Legacy USB Storage Detect ------------- : [Disabled]
Comment