Hey guys!!!
I have been searching and digging this forum to the last pages and searched almost every single post with q9550 and ud3p and could raise my first OC to 3.4 easily without raising the voltage too much.
but theres something I cant understand and its the fsb x ram frequency... that 1:1 thing...
Is it the system memory multiplier value?
I mean, if I have my CPU Host Frequency at 400x8.5 do I have to use a "D" value like? 2.00 D? So it matches the 400 FSB?
That is not clear at all for me.
Something that is also happening is that I always keep my computer turned on dowloading movies and stuff but everytime I seat on my desk I can see a message on W7 x64 that says that the computer was turned off... I was playing Half Life 2 the other day and a BSOD came up with somethin like DRIVER_ and could not read anything else...
I will show what I have:
CPU = Intel Core2Quad q9550 E0
Motherboard = Gigabyte EP45-UD3P REV: 1.6
BIOS Version =
Ram = Corsair XMS2 TWIN2X4096-8500C5C G
It would be great if I get any feedback on how to use it as well as some suggestion to keep it working flawlessly.
I have another thing... the last time I tried to run Prime95, it only showed 2 cores
Thank you very much!
I have been searching and digging this forum to the last pages and searched almost every single post with q9550 and ud3p and could raise my first OC to 3.4 easily without raising the voltage too much.
but theres something I cant understand and its the fsb x ram frequency... that 1:1 thing...
Is it the system memory multiplier value?
I mean, if I have my CPU Host Frequency at 400x8.5 do I have to use a "D" value like? 2.00 D? So it matches the 400 FSB?
That is not clear at all for me.
Something that is also happening is that I always keep my computer turned on dowloading movies and stuff but everytime I seat on my desk I can see a message on W7 x64 that says that the computer was turned off... I was playing Half Life 2 the other day and a BSOD came up with somethin like DRIVER_ and could not read anything else...
I will show what I have:
CPU = Intel Core2Quad q9550 E0
Motherboard = Gigabyte EP45-UD3P REV: 1.6
BIOS Version =
Ram = Corsair XMS2 TWIN2X4096-8500C5C G
Code:
[b][u]MB Intelligent Tweaker(M.I.T.)[/u][/b] Robust Graphics Booster ...............: Auto CPU Clock Ratio ..........................: 8 x Fine CPU Clock Ratio.....................:. +0.5 CPU Frequency ...........................: 3.40GHz( 400x8.5) [b][u]Clock Chip Control [/u][/b] [b][u]Standard Clock Control[/u][/b] CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: 400Mhz [B]PCI Express Frequency (Mhz) .........:100[/B] C.I.A.2 .................................:[Disabled] [b][u]Advanced Clock Control [Press Enter][/u][/b] CPU Clock Drive...........................: <<< 700mV PCI Express Clock Drive.................: <<< 700mV CPU Clock Skew (ps)....................: <<< 0ps MCH Clock Skew (ps)...................: <<< 0ps [b][u]DRAM Performance Control[/u][/b][u][/u] [B]Performance Enhance...................: [TURBO][/B] Extreme Memory Profile (X.M.P.).....: [Auto] (G)MCH Frequency Latch...............: [Auto] System Memory Multiplier ..............: 2.00D Memory Frequency (Mhz) ..............: 800 DRAM Timing Selectable ................: [Manual] [b]Standard Timing Control[/b] CAS Latency Time........................5 tRCD .........................................5 tRP'...........................................5 tRAS..........................................15 b][u]Advanced Timing Control[/u][/b] tRRD........................................... 4[Auto] tWTR..........................................4[Auto] tWR............................................8[Auto] tRFC...........................................68[Auto] tRTP...........................................4[Auto] Command Rate (CMD) ....................:0[Auto] [u][b]Driving Strength Profiles[/b][/u][b][/b] Driving Strength ............................ [b]Channel A[/b] Static tRead Value.........................:Auto tRD Phase0 Adjustment...................:Auto tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto Dimm2 Clock Skew Control...............:Auto [b]Channel B[/b] Static tRead Value.........................:Auto tRD Phase0 Adjustment...................:Auto tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps [b][U]Motherboard Voltage Control[/U][/b][U][/U] Load-Line Calibration..............Enabled [b]CPU[/b] CPU Vcore….……….........................:Auto CPU Termination…..... 1.200V*.......:Auto CPU PLL…………………....1.500V*.......: Auto CPU Referen.…………....0.755V*.......: Auto CPU Reference2………,,0.800V*.......: Auto [b]MCH/ICH[/b] MCH Core…………….....1.100V...........:Auto MCH Reference….…….0.800V...........; Auto MCH/DRAM Ref.…......0.900V...........: Auto ICH I/O……………….....1.500V............:Auto ICH Core…………...……1.100V............: Auto [b]DRAM[/b] DRAM Voltage ……....1.800V............: 2.100V DRAM Termination .…0.900V............:Auto Channel A Reference 0.900V............:Auto Channel B Reference 0.900V............: Auto [b][U]Advanced Settings[/U][/b][U][/U] Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Disabled] Virtualization Technology................: [Disabled] [b][U]Integrated Peripherals[/U][/b][U][/U] Legacy USB Storage Detect ..............[Disabled]
It would be great if I get any feedback on how to use it as well as some suggestion to keep it working flawlessly.
I have another thing... the last time I tried to run Prime95, it only showed 2 cores
Thank you very much!
Comment