Announcement
Collapse
No announcement yet.
Thermal pastes and heatsinks
Collapse
X
-
Thermal pastes and heatsinks
Current system:
- Intel Q8200 Processor (2.33GHz) (7x multi, roughly 340MHz FSB)
- Intel DG45ID Motherboard (stupid locked BIOS >:( )
- 6 GB DDR2 RAM (667MHz)
- PNY GeForce 9500GT (750MHz Core clock, 1900MHz Shader clock, 500MHz Memory clock)
-585GB SATA HDD (7200RPM)Tags: None
-
Re: Thermal pastes and heatsinks
DO NOt I repeat DO NOT pull the spreaders on your Dominators. Corsair has glued the IC's to the heatspreaders in most instances, which results in sometimes pulling IC's off the PCB when removing them.
Also AS5 is the standard, there are many pastes on the market that can do better, and if I remember corectly AS5 claims to be non-conductive.
OCZ V2 is basically a Xig 1283...should do well for ya, and at a better pricepoint than the Xig.
Hope this helps!
-
Re: Thermal pastes and heatsinks
Thanks!
I won't try to get the hs off.Current system:
- Intel Q8200 Processor (2.33GHz) (7x multi, roughly 340MHz FSB)
- Intel DG45ID Motherboard (stupid locked BIOS >:( )
- 6 GB DDR2 RAM (667MHz)
- PNY GeForce 9500GT (750MHz Core clock, 1900MHz Shader clock, 500MHz Memory clock)
-585GB SATA HDD (7200RPM)
Comment
Comment