Announcement

Collapse
No announcement yet.

Heatsink seated Properly?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Heatsink seated Properly?

    I just purchased the Gigibyte Cooler with AS5 and must say that I am happy with it. However, I am concerned that it is not seated properly because the heatsink is so cool. My temps are acceptable- 43-45c at idle(ambient air temp 23-39c), 56-59c at load with vcor set to 1.75. Because the heatsink is so cool to the the touch, and verified 36c with a digital thermometer, should I try to reset the heatsink?
    Is this a true statement ----->The better the heatsink is seated on the cpu, the better it will tranfer heat, therefore, the warmer it should be? Or, can I assume becasue my temp differential from idle to load is within acceptable limits, that the heatsink is seated properly?

    Also, Is a thermal probe taped to the bottom of my processor going to more accurate than MBM5 or Speedfan?

  • #2
    if its not seated you would see much much higher temps...aslo if you just did this, give it a couple days for the AS to set....it will reduce the temps another 1-3 degrees.....

    Comment


    • #3
      That it what I thought but I just wanted to make sure. Thanks.

      Comment

      Working...
      X