If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Holesaw in a drillpress or steady hand with a cordless drill on low speed setting. Also clamp the acrylic to a piece of wood to keep the pilot drill stable.
Yes, MAKE SURE YOU USE MASKING TAPE! I made a few scratches on my case making a blow hole before i thought about using masking tape. I can imagine it would be a lil worse on the acrylic.
Comment