SX38P2 won't boot after bios flash

[ritahirsch]

[iluvatar]

Re: SX38P2 won't boot after bios flash

hi ritahirsch.... ik woon ook in belgie, en heb exact hetzelfde probleem. Heb je het nog weten op te lossen ?

[mikmak]

Re: SX38P2 won't boot after bios flash

Hi, first at all do not buy any more shuttle products.
The question is, as you have just sayd, that you have to reprogram your eeprom.
The eeprom must be extracted from its own socket...by doing it you need an "extractor" which it is commonly sold in eletrical shops. Then you have to look where to let reprogram your eeprom. Just look for some internet sites in your country...usually such service does not cost more than 20 euro.
Generally such "electrical laboratories" ask for the eeprom and the bios code (rom) to be shipped at your cost.
A good thing should be also to write directly to "shuttle corp" and ask what do they do during their job time?
The bios code for some barebones is almost nothing different than garbage.

[Xeno555]

Re: SX38P2 won't boot after bios flash

Maybe pulling the battery for 30 minutes was not enough? Try to find jumper that resets the BIOS, or if you can go in to BIOS reset in the menu options?

X