Gigabyte GA-EX58-UD5 + KHX2000C9D3T1K3/6GX

[EivindS]

[Lsdmeasap]

Re: Gigabyte GA-EX58-UD5 + KHX2000C9D3T1K3/6GX

Please see here, no need to make three threads unless no one was helping you out :)

http://forums.tweaktown.com/f69/gigabyte-ga-ex58-ud5-khx2000c9d3t1k3-6gx-35492/

[EivindS]

Re: Gigabyte GA-EX58-UD5 + KHX2000C9D3T1K3/6GX

Sorry about that, I just tough maybe different people where reading different "areas" .. :)

[Lsdmeasap]

Re: Gigabyte GA-EX58-UD5 + KHX2000C9D3T1K3/6GX

There is but you may have been waiting on a reply for a while in other sections.

[cytec]

Re: Gigabyte GA-EX58-UD5 + KHX2000C9D3T1K3/6GX

I am having the exact same issue with a similar hardware setup. I've been reading the UD5 manual, but man, this bios is crazy!

Specs:
i7 920 d0 stepping
Kingston Hyperx 2000 3x2gb
Gigabyte UD5 mobo


It boots at 1066, as the OP originally stated. If anyone has a writeup on how to obtain those speeds, that would be great! Thanks,

matt

[Lsdmeasap]

Re: Gigabyte GA-EX58-UD5 + KHX2000C9D3T1K3/6GX

Getting 2000Mhz will be a bit tough for you to do at first. Have you tried to get 1600Mhz going?

I can help but there is no write up anywhere that I know of. If you need help get a template from my signature and give me your full current settings and I will advise you how to go about trying 1600 and 2000

[TeYyArEe]

Re: Gigabyte GA-EX58-UD5 + KHX2000C9D3T1K3/6GX

Hi everyone !
I have i7 920 d0 stepping,Kingston Hyperx 2000 3x2gb,Gigabyte EX58-UD5. I am having same issue. I use this RAM at 1333 MHz. But, When i set profile1 from XMP (2000 MHz), my PC running but it is not post. is this a BIOS problem? Can i solve this problem with update BIOS?


Hurry up and get idle !