Z170 Gaming 7 EU with bios F6K-F6-F7A-F7D - 6.700K and Xyperx Fury HX426C15FBK2/16 16GB (2 x 8GB) DDR4-2666 1.2v
Tested..
XPM on slot 1-3 default speed 26.66 = errors on mem test,gaming crash
XPM on slot 2-4 default speed 26.66 = errors on mem test,gaming crash
XPM off slot 1-3 default speed 26.66 DRam Voltage/Training Voltage: 1.300v - VCCIO/SA: 1.150v = errors on mem test,gaming crash
XPM off slot 2-4 default speed 26.66 DRam Voltage/Training Voltage: 1.300v - VCCIO/SA: 1.150v = errors on mem test,gaming crash
XPM off slot 1-3 default speed 26.66 DRam Voltage/Training Voltage: 1.340v - VCCIO/SA: 1.200v/1.150 = errors on mem test,gaming crash
XPM off slot 2-4 default speed 26.66 DRam Voltage/Training Voltage: 1.340v - VCCIO/SA: 1.200v/1.150 = errors on mem test,gaming crash
XPM off slot 1-3 speed 24.00 DRam Voltage/Training Voltage: 1.340v - VCCIO/SA: 1.200v/1.150 = errors on mem test,gaming crash
XPM off slot 2-4 speed 24.00 DRam Voltage/Training Voltage: 1.340v - VCCIO/SA: 1.200v/1.150 = errors on mem test,gaming crash
XPM off slot 1-3 speed 21.33 Ram Voltage: default (1.200v) VCCIO/SA: default (1.060v/0.960) = NO ERROR-STABLE
XPM off slot 2-4 speed 21.33 Ram Voltage: default (1.200v) VCCIO/SA: default (1.060v/0.960) = NO ERROR-STABLE
Note ..when i try to put manual memory settings (not the defaults )i have post bios error 40 .
All the rest motherboard settings at defaults.
After flashing new bios or load optimized defaults the MB doesnt boot with single Dram module placed in slot 1 or slot 2 (boot loop error 55). If i placed it to slot 3 or 4 boots fine with advertized Dram speed 26.66 and passes all tests STABLE!. (Single Dram Module each time)
Problems starts when i use both Dram modules placed in 1-3 or 2-4 slots.
I have to boot first with single Dram Module placed on slot 3-4 then download the speed to 21.33 and after that i can place the second module and boot up with both loaded.
Any help to get this running at default speed STABLE ?????
Tested..
XPM on slot 1-3 default speed 26.66 = errors on mem test,gaming crash
XPM on slot 2-4 default speed 26.66 = errors on mem test,gaming crash
XPM off slot 1-3 default speed 26.66 DRam Voltage/Training Voltage: 1.300v - VCCIO/SA: 1.150v = errors on mem test,gaming crash
XPM off slot 2-4 default speed 26.66 DRam Voltage/Training Voltage: 1.300v - VCCIO/SA: 1.150v = errors on mem test,gaming crash
XPM off slot 1-3 default speed 26.66 DRam Voltage/Training Voltage: 1.340v - VCCIO/SA: 1.200v/1.150 = errors on mem test,gaming crash
XPM off slot 2-4 default speed 26.66 DRam Voltage/Training Voltage: 1.340v - VCCIO/SA: 1.200v/1.150 = errors on mem test,gaming crash
XPM off slot 1-3 speed 24.00 DRam Voltage/Training Voltage: 1.340v - VCCIO/SA: 1.200v/1.150 = errors on mem test,gaming crash
XPM off slot 2-4 speed 24.00 DRam Voltage/Training Voltage: 1.340v - VCCIO/SA: 1.200v/1.150 = errors on mem test,gaming crash
XPM off slot 1-3 speed 21.33 Ram Voltage: default (1.200v) VCCIO/SA: default (1.060v/0.960) = NO ERROR-STABLE
XPM off slot 2-4 speed 21.33 Ram Voltage: default (1.200v) VCCIO/SA: default (1.060v/0.960) = NO ERROR-STABLE
Note ..when i try to put manual memory settings (not the defaults )i have post bios error 40 .
All the rest motherboard settings at defaults.
After flashing new bios or load optimized defaults the MB doesnt boot with single Dram module placed in slot 1 or slot 2 (boot loop error 55). If i placed it to slot 3 or 4 boots fine with advertized Dram speed 26.66 and passes all tests STABLE!. (Single Dram Module each time)
Problems starts when i use both Dram modules placed in 1-3 or 2-4 slots.
I have to boot first with single Dram Module placed on slot 3-4 then download the speed to 21.33 and after that i can place the second module and boot up with both loaded.
Any help to get this running at default speed STABLE ?????
Comment