Tweet
GA-X58A-UD7 boot problems
Hi guys, I'm new to this forum. Wish I had found it earlier. I have a GA-X58A-UD7 MB. I've just started having problems with. After upgrading my memory and subsequently having to power down my system. On restart the system goes thru a normal boot and stops at post error code 50. Sometimes I can recycle power and it will boot ok. I know this is indicating the USB keyboard and mouse did not initialize. I have tried a different keyboard, same problem, I have also used a PS/2 keyboard and still have the same problem. I have been using my existing USB keyboard and mouse configuration for several years with no problems. Eventually after repeated boot attempts it will finally initialize. Any thoughts on this problem would be appreciated. Thanks.
-
-
Re: GA-X58A-UD7 boot problems
what is error code 50 in the manual??
what make/model of ram are you using and how much?Gigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
http://www.youtube.com/user/warren304#p/u Visit Me On Youtube
Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!
-
Re: GA-X58A-UD7 boot problems
I have 12GB (3x4G) of ram using Corsair Vengeance DDR3 1600. The error code displayed indicates the boot sequence stopped at the initialization of the USB keyboard and mouse. I was able to use the reset on the board to clear the problem and finish booting the system however my keyboard and mouse were dead. I shut down and used a PS/2 keyboard and mouse and was able to get my system up and running again. I tried using different USB ports however the USB keyboard and mouse are still dead.Comment
-
Re: GA-X58A-UD7 boot problems
any update on this?
are you using the latest bios? made sure usb are enabled in the bios aswell?Gigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
http://www.youtube.com/user/warren304#p/u Visit Me On Youtube
Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!
Comment
-
Re: GA-X58A-UD7 boot problems
An update on my problem. I was able to get around the boot problem by using the reset button on the board. The system will then boot up normally. I had to reinstall the software for my keyboard and mouse. All works fine now. What's curious is this boot problem only occurs after turning off the power supply. After a normal shutdown through windows the system boots up normally. Still not sure what's going on, Bios is latest rev. Would like to know what's going on, but for now things are working.Comment
Comment