I just completed building my system, here is the configuration:
Gigabyte 990FXA-UD3 / AMD 990FX/SB950/Rev. 4.1
AMD FX9370 Processor
Cooler Master Liquid cooling
32GB Crucial Ballistic DDR3 (1866Mhz)
Crucial M100 (256Gb) SSD
Hitatchi HGST 1TB HDD
MSI AMD R9 390X video card
Thermaltake V71 Case
Since completing the build, I have not had any success in getting the onboard Network Controller to work properly
I have flashed the version F3 of the BIOS, but this really didn't change anything however; I felt it might be necessary to support this new processor.
I have verified in the BIOS that the Onboard LAN Controller is enabled, and have tried several times to uninstall and reinstall the drivers from the included DVD that came with the motherboard, but I am receiving the following error when installing the driver:
"Device driver software was not successfully installed - Please consult with your device manufacturer for assistance getting this device installed" and additionally, "Realtek Ethernet Controller Driver - The Realtek Network Controller was not found. If Deep Sleep Mode is enabled Please Plug the Cable." The Cable is Plugged in. I have even gone into the Realtek PCIe Controller's Advanced setting and turned off Energy Efficient Ethernet and Green Ethernet to insure that Deep Sleep is not enabled, and have even downloaded the newer driver from the Gigabyte support website, but I'm still not able to get the driver to load properly and get the Network card online.
The lights on the NIC do not light. They did only on the first time that I powered up this rig, but they weren't on correctly (solid yellow and solid amber)
Any help, assistance, or suggestions would be greatly appreciated.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
*UPDATE*
I went to the local Best Buy and purchased a Netgear WNA3100 N300 Wireless USB Adapter and TRIED to install it, but I'm still having the same sorts of problems. After the driver installed, this USB Wireless adapter will not activate. The device properties states:
"This device is not working properly because Windows cannot load the drivers required for this device (Code 31)". This is the same problem I have the the onboard (motherboard mounted) LAN Adapter. I am now at a loss as to why Neither network adapter will properly install and work.
Gigabyte 990FXA-UD3 / AMD 990FX/SB950/Rev. 4.1
AMD FX9370 Processor
Cooler Master Liquid cooling
32GB Crucial Ballistic DDR3 (1866Mhz)
Crucial M100 (256Gb) SSD
Hitatchi HGST 1TB HDD
MSI AMD R9 390X video card
Thermaltake V71 Case
Since completing the build, I have not had any success in getting the onboard Network Controller to work properly
I have flashed the version F3 of the BIOS, but this really didn't change anything however; I felt it might be necessary to support this new processor.
I have verified in the BIOS that the Onboard LAN Controller is enabled, and have tried several times to uninstall and reinstall the drivers from the included DVD that came with the motherboard, but I am receiving the following error when installing the driver:
"Device driver software was not successfully installed - Please consult with your device manufacturer for assistance getting this device installed" and additionally, "Realtek Ethernet Controller Driver - The Realtek Network Controller was not found. If Deep Sleep Mode is enabled Please Plug the Cable." The Cable is Plugged in. I have even gone into the Realtek PCIe Controller's Advanced setting and turned off Energy Efficient Ethernet and Green Ethernet to insure that Deep Sleep is not enabled, and have even downloaded the newer driver from the Gigabyte support website, but I'm still not able to get the driver to load properly and get the Network card online.
The lights on the NIC do not light. They did only on the first time that I powered up this rig, but they weren't on correctly (solid yellow and solid amber)
Any help, assistance, or suggestions would be greatly appreciated.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
*UPDATE*
I went to the local Best Buy and purchased a Netgear WNA3100 N300 Wireless USB Adapter and TRIED to install it, but I'm still having the same sorts of problems. After the driver installed, this USB Wireless adapter will not activate. The device properties states:
"This device is not working properly because Windows cannot load the drivers required for this device (Code 31)". This is the same problem I have the the onboard (motherboard mounted) LAN Adapter. I am now at a loss as to why Neither network adapter will properly install and work.
Comment