Removed my currently working msi 560ti. Installed gtx 970, turned on pc, windforce emblem lights up and fans run, but no display output on hdmi or either of the dvi ports.
Put gtx 970 in another pc, it works there. Tested a radeon hd7850 in my pc, that card and the 560ti working.
Motherboard is gigabyte z77 ud5h with 2600k cpu. PSU is corsair hx 750. Updated bios for motherboard to F14. Still no display with gtx970. Launched windows from onboard hdmi graphics. Uninstalled all nvidia drivers. Attempted to install driver for gtx970, wont install, it says it cant find compatible hardware. Clean installed windows 7 64bit, still not working. Removed motherboard and put on wood bench with only ram, cpu, power supply and gtx970 (no hard drive), can hear speaker beep, still no display. Inspected all connections, both psu cables (one 8 pin and one 6 pin) both fully seated, pci connection fully seated with nothing preventing the card from seating fully, and hdmi cable fully seated. Cables were tested on another gpu (the 560 ti which uses 2 6 pin connectors) and worked on that.
I disabled onboard graphics in bios and set it to pci slot only. Got a long beep followed by two short beeps out of the system speaker. Tried pulling mother board battery and cycling power button several times, tired loading optimized defaults in bios.
Put gtx 970 in another pc, it works there. Tested a radeon hd7850 in my pc, that card and the 560ti working.
Motherboard is gigabyte z77 ud5h with 2600k cpu. PSU is corsair hx 750. Updated bios for motherboard to F14. Still no display with gtx970. Launched windows from onboard hdmi graphics. Uninstalled all nvidia drivers. Attempted to install driver for gtx970, wont install, it says it cant find compatible hardware. Clean installed windows 7 64bit, still not working. Removed motherboard and put on wood bench with only ram, cpu, power supply and gtx970 (no hard drive), can hear speaker beep, still no display. Inspected all connections, both psu cables (one 8 pin and one 6 pin) both fully seated, pci connection fully seated with nothing preventing the card from seating fully, and hdmi cable fully seated. Cables were tested on another gpu (the 560 ti which uses 2 6 pin connectors) and worked on that.
I disabled onboard graphics in bios and set it to pci slot only. Got a long beep followed by two short beeps out of the system speaker. Tried pulling mother board battery and cycling power button several times, tired loading optimized defaults in bios.
Comment