I am putting together a HTPC with the following components:
1) mobo: GA-F2A88XM-D3H latest F6 bios
2) cpu: A10-6800K
3 heatsink fan: Scythe-Big Shuriken 2 rev.b
4) memory: patriot viper low profile ddr3-1866mhz 1.5v
5) SSD: Crucial m4 128gb ssd
6) case: silverstone SG02-F Sugo case
7) PSU; corsair hx750hx
8) Asus dvdr
Problem: I can`t seem to undervolt the cpu in the bios. I can overvolt but can`t seem to undervolt. Using pge up one can go from auto to normal to + whatever voltage increments to the vid, but when using pge dwn, nothing. I tried to manual enter the voltage but it won`t stick and save.
What am I missing here. I appreciate any assistance.
1) mobo: GA-F2A88XM-D3H latest F6 bios
2) cpu: A10-6800K
3 heatsink fan: Scythe-Big Shuriken 2 rev.b
4) memory: patriot viper low profile ddr3-1866mhz 1.5v
5) SSD: Crucial m4 128gb ssd
6) case: silverstone SG02-F Sugo case
7) PSU; corsair hx750hx
8) Asus dvdr
Problem: I can`t seem to undervolt the cpu in the bios. I can overvolt but can`t seem to undervolt. Using pge up one can go from auto to normal to + whatever voltage increments to the vid, but when using pge dwn, nothing. I tried to manual enter the voltage but it won`t stick and save.
What am I missing here. I appreciate any assistance.
Comment