Hey all - I was having some system instability on a GA-Z87X-UD3h, which has been resolved by switching SATA ports on my Windows drive (a 256GB Samsung 840 Pro). However, since doing this, the drive in question has disappeared from my boot sequence selector on the Home screen in the BIOS; it now shows only my optical and mechanical data drives as options (as well as any flash drives I plug in).
The only way I've been able to boot properly into my SSD-based Windows installation is by entering the BIOS each time the machine boots up, going to the Save and Exit menu, and selecting the SSD from the Boot Override menu where it does show up. That's rather cumbersome though; I'd rather it boot into it automatically. Any suggestions would be appreciated, thanks! System specs below just in case.
Gigabyte GA-Z87X-UD3H
Core i5-4670K (not overclocked)
G.Skill DDR3-1866 8GB
ASUS GeForce 660 GTX
Samsung 840 Pro 256GB
Seagate Barracuda 2TB
Windows 7 Ultimate
The only way I've been able to boot properly into my SSD-based Windows installation is by entering the BIOS each time the machine boots up, going to the Save and Exit menu, and selecting the SSD from the Boot Override menu where it does show up. That's rather cumbersome though; I'd rather it boot into it automatically. Any suggestions would be appreciated, thanks! System specs below just in case.
Gigabyte GA-Z87X-UD3H
Core i5-4670K (not overclocked)
G.Skill DDR3-1866 8GB
ASUS GeForce 660 GTX
Samsung 840 Pro 256GB
Seagate Barracuda 2TB
Windows 7 Ultimate
Comment