Z77X-D3H rev 1.1 not boot with videocard
Specs (first is main)
CPU: i5-3550 or i5-3570k
RAM: Samsung 1600 2x4Gb or Hynix 1333 2x4Gb (tried to use only one module and change slots)
GPU: Gigabyte GTX 650TI 1Gb or Asus EN9800GT
PSU: Seasonic 750W (SS-750??) or FSP 500W (2x4pinCPU, 6Pin Video) or Zalman 460W (460B-APS)
HDD/ODD: all sata 1-2xHDD or SSD + 1xODD
Problem:
Everything was working only first time, before we turn off PSU.
Then it is not boot (fans start/stop spin for 1 sec) with any of this cards. (first time all video cards was working)
Tried to:
Switch Gen3 -> Gen2 -> Gen1
Set boot priority (PEG) and disable igpu
"Clear CMOS" (pins, remove battery)
update BIOS F15 -> F16 ->F17f -> F17h -> F17i
checked socket pins
switch/replace ddr3 modules and cpu
boot without usb/sata devices (only ps/2 or usb 2.0 keyboard)
Result:
All the time cpu and videocard fans start spins for 1 sec and stop, power button not work any more (had to use switch on PSU on/off)
If remove video card - PC boots.
When 6pin disconnected from 650ti - PC boots but discrete card not work, only iGPU.
Check all hardware on other mobo -> everything working.
All hardware is new, except:
650Ti is 2 month and 9800Gt is few years, New HIS HD7870 form that PC comes next week.
Multimeter shows (on 6Pin and Molex) 12,3V on system boot and on other PC(with videocard) it drops to 12v on full load.
Cant get real value on Z77X-D3H - start/stop to fast - my multimeter shows only current values, not max
Any ideas what to do?
I can hold this mobo for a couple of days.
Specs (first is main)
CPU: i5-3550 or i5-3570k
RAM: Samsung 1600 2x4Gb or Hynix 1333 2x4Gb (tried to use only one module and change slots)
GPU: Gigabyte GTX 650TI 1Gb or Asus EN9800GT
PSU: Seasonic 750W (SS-750??) or FSP 500W (2x4pinCPU, 6Pin Video) or Zalman 460W (460B-APS)
HDD/ODD: all sata 1-2xHDD or SSD + 1xODD
Problem:
Everything was working only first time, before we turn off PSU.
Then it is not boot (fans start/stop spin for 1 sec) with any of this cards. (first time all video cards was working)
Tried to:
Switch Gen3 -> Gen2 -> Gen1
Set boot priority (PEG) and disable igpu
"Clear CMOS" (pins, remove battery)
update BIOS F15 -> F16 ->F17f -> F17h -> F17i
checked socket pins
switch/replace ddr3 modules and cpu
boot without usb/sata devices (only ps/2 or usb 2.0 keyboard)
Result:
All the time cpu and videocard fans start spins for 1 sec and stop, power button not work any more (had to use switch on PSU on/off)
If remove video card - PC boots.
When 6pin disconnected from 650ti - PC boots but discrete card not work, only iGPU.
Check all hardware on other mobo -> everything working.
All hardware is new, except:
650Ti is 2 month and 9800Gt is few years, New HIS HD7870 form that PC comes next week.
Multimeter shows (on 6Pin and Molex) 12,3V on system boot and on other PC(with videocard) it drops to 12v on full load.
Cant get real value on Z77X-D3H - start/stop to fast - my multimeter shows only current values, not max
Any ideas what to do?
I can hold this mobo for a couple of days.
Comment