Hi all,
I really hope that someone here can help me.
I purchased a complete new kit yesterday to build a monster machine for video editing, so everything is new and freshly unboxed.
The relevant kit to know about, and which is built at the moment, is:
Motherboard: Gigabyte Z77X-UP5TH
CPU: Intel i7-3770K
Memory: Kingston KHX16C10B1K2 8GB (x4 to make 32GB)
Cooler: Corsair H60
PSU: Corsair CX750
I've been building machines for 20 years so I certainly know what I'm doing and can confirm that everything is mounted correctly.
The problem is as follows:
When I boot the machine, all the relevant fans start up, and the LED on the motherboard starts to display its codes.
After a few seconds, it displays "Cb" (or perhaps "C6"), and then loops round again.
I don't get anything on the display (have tried DSUB, HDMI and DVI), and USB keyboard and mouse do not get to the point of having power sent to them - or at least not enough for the num-lock, caps-lock and scroll-lock lights to flash up.
The sequence of codes on the LED display I can identify (after filming and playing back slowly) are: 15, 36, 32, 4F, 60,62, 78, 72, 98, 9A, 96, Cb.
I have tried dismounting and remounting everything, verified that the power cables are in properly, tried the CMOS reset both ways (button and shorting out the pins, and the CMOS switch method), and have even replaced the battery.
What could be the reason for this? I have been searching on-line for over 8 hours in various sites, but to no avail. Have raised a ticket with Gigabyte, but they have not even read it yet...
No mater what I try, I have not yet seen the BIOS setings or had anything come up on-screen.
Please, if someone can give some help, that will be great - because its a 3 hour round-trip to the store where I bought this motherboard from, and only want to take it back if it really is needed.
Thank you!
I really hope that someone here can help me.
I purchased a complete new kit yesterday to build a monster machine for video editing, so everything is new and freshly unboxed.
The relevant kit to know about, and which is built at the moment, is:
Motherboard: Gigabyte Z77X-UP5TH
CPU: Intel i7-3770K
Memory: Kingston KHX16C10B1K2 8GB (x4 to make 32GB)
Cooler: Corsair H60
PSU: Corsair CX750
I've been building machines for 20 years so I certainly know what I'm doing and can confirm that everything is mounted correctly.
The problem is as follows:
When I boot the machine, all the relevant fans start up, and the LED on the motherboard starts to display its codes.
After a few seconds, it displays "Cb" (or perhaps "C6"), and then loops round again.
I don't get anything on the display (have tried DSUB, HDMI and DVI), and USB keyboard and mouse do not get to the point of having power sent to them - or at least not enough for the num-lock, caps-lock and scroll-lock lights to flash up.
The sequence of codes on the LED display I can identify (after filming and playing back slowly) are: 15, 36, 32, 4F, 60,62, 78, 72, 98, 9A, 96, Cb.
I have tried dismounting and remounting everything, verified that the power cables are in properly, tried the CMOS reset both ways (button and shorting out the pins, and the CMOS switch method), and have even replaced the battery.
What could be the reason for this? I have been searching on-line for over 8 hours in various sites, but to no avail. Have raised a ticket with Gigabyte, but they have not even read it yet...
No mater what I try, I have not yet seen the BIOS setings or had anything come up on-screen.
Please, if someone can give some help, that will be great - because its a 3 hour round-trip to the store where I bought this motherboard from, and only want to take it back if it really is needed.
Thank you!
Comment