X48-ds5 question

[cyborg66]

i have just put a ssd drive in and installed windows 7 everything seems to be working ok.The bios i am using at the monent is F5 when it boots it says the ahci only supports hard drives and cdroms but the system still boots pretty fast into windows should i upgrade the bios or leave it on the F5 bios because everything seems to be working fine.

[JustRob]

Re: X48-ds5 question

I would update the Bios for sure. Don't use the @Bios, use Qflash to do it. Also if you have any overclocks set your bios back to default before you flash and the load optimized default once you flash. Good luck.

[Hyper530]

Re: X48-ds5 question

Latest version BIOS is F8C: GIGABYTE - Motherboard - Socket 775 - GA-X48-DS5 (rev. 1.x)

[stasio]

Re: X48-ds5 question

Latest version BIOS is F8C: GIGABYTE - Motherboard - Socket 775 - GA-X48-DS5 (rev. 1.x)

Latest version BIOS is F8h:http://forums.tweaktown.com/gigabyte...ta-bios-2.html

[cyborg66]

Re: X48-ds5 question

whats the differences between F8C and F8h bios

[stasio]

Re: X48-ds5 question

whats the differences between F8C and F8h bios

That time....3 years ago ! mostly fixing SMART Command Fail for OCZ Sandforce FW 1.11.

[cyborg66]

Re: X48-ds5 question

ok i have flashed it to f8c.are these the right settings in the bios

ICH Sata Control Mode - AHCI

SATA Port0-3 Native Mode - Enabled

Onboard SATA/IDE Device - enabled

onboard sata/ide Ctrl Mode - IDE