OK I'll try to keep this as simple as possible.
Problem:
Setting the CPU Clock Ratio from "AUTO" to anything including what would be the stock multiplier (x30) results in: "The system has experienced boot failures because of overclocking" I then have to set the multiplier back to "AUTO" to fix this. I simply wish to under-clock my APU's, which should be a feature on this motherboard.
Hardware I have:
What I have tried:
Sadly I've come close to concluding that this is a BIOS problem, and this guy seems to be in the same boat: http://forums.tweaktown.com/gigabyte...processor.html
Any help would be much appreciated before I go off to ebay.
Problem:
Setting the CPU Clock Ratio from "AUTO" to anything including what would be the stock multiplier (x30) results in: "The system has experienced boot failures because of overclocking" I then have to set the multiplier back to "AUTO" to fix this. I simply wish to under-clock my APU's, which should be a feature on this motherboard.
Hardware I have:
- Gigabyte A75N-USB3 (x2)
- A8-3870k (x2)
- A8-3850 (x1)
- A6-3500 (x1)
- Multiple RAM Sets
- Multiple Power Supplies
- Multiple SSD/HDDs
What I have tried:
- A second A75N-USB3
- Every BIOS revision (f1,f2,f3c)
- Every multiplier option
- Overclock and Underclock
- Different RAM, Timings and Voltages
- Different Power Supply
- All my APUs
Sadly I've come close to concluding that this is a BIOS problem, and this guy seems to be in the same boat: http://forums.tweaktown.com/gigabyte...processor.html
Any help would be much appreciated before I go off to ebay.
Comment