Announcement

Collapse
No announcement yet.

Unable to enter the Bios after a Bios update on Z77x ud5H mb.

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Unable to enter the Bios after a Bios update on Z77x ud5H mb.

    Today I installed the new bios f6 using @bios.

    The Bios update went well, but I was not able to enter the bios screen after re-booting.

    This time I did not have a screen freeze in W7, all went well.

    Had to do a "Clear Cmos" before I was able to enter the familiar Bios.

    So concluding the bios updated went well, but initially not able to enter the Bios.

    Has anybody encountered similar problems?

    tks.



    quote
    Installed Beta bios f6i no problems till this morning.

    Whilst browsing the internet my screen froze (most likely nvdia driver 296.10 problems)
    had this before but normally the screen recovers.

    Now had to hard switch off the pc.

    Than when I attempted to enter this Bios, I got the uefi bleenscreen but than every
    froze solid.

    had to re-sett installed bios f5 via @bios in w7 and was than again able to enter the
    normal bios screens.

    could de screen driver crash caused this weird problem?

    assume the bios works normally used the standard vga drivers?

    thanks for the feedback.

    unquote
    Last edited by polypenko; 04-25-2012, 04:30 PM. Reason: .
    Tags: None
  • #2
    Re: Unable to enter the Bios after a Bios update on Z77x ud5H mb.

    I haven't installed the F6 final yet. Let you know if I have any problems.
    Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
    Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
    PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
    Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
    Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

     Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
    HTPC: Z68 Pro3 M / 2105
    SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
    SOLD:Z87X-UD5H /4770K

    Comment

    • #3
      Re: Unable to enter the Bios after a Bios update on Z77x ud5H mb.

      I just updated to BIOS F6 and didn't experience the problem described.

      Unfortunately I couldn't seem to get QFlash to recognise my USB stick so I reluctantly flashed using @BIOS then loaded optimised defaults.

      - Steve

      Comment

      • #4
        Re: Unable to enter the Bios after a Bios update on Z77x ud5H mb.

        I also updated to F6 with no problems.
        I am unable to get Qflash to recognize my front USB 2.0 ports as well, but I have the USB 3.0 port thingie included with the board mounted in a 5.25" bay (plugged into internal 3.0 USB header) and it works in those just fine.
        Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
        Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
        PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
        Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
        Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

         Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
        HTPC: Z68 Pro3 M / 2105
        SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
        SOLD:Z87X-UD5H /4770K

        Comment

        • #5
          Re: Unable to enter the Bios after a Bios update on Z77x ud5H mb.

          Did some further checking this morning, noticed that when I remove my momo steering wheel and Canon printer
          connected to the rear usb 3.0 ports the problem does not occur.
          My Logitech mouse/keyboard receiver was connected in the rear usb port, also removed this receiver only worked
          on the front usb 3.0 not the usb 2.0 front port on my nzxt swith 810 case

          so it seems that whlist updating the bios it is highly dependable what is connected to the rear usb ports?

          Comment

          • #6
            Re: Unable to enter the Bios after a Bios update on Z77x ud5H mb.

            Don't know. I've probably had everything uplugged/replugged 100 times in the past week and I don't pay much attention to which ports I plug which USB (2.0) device into. I also have a Logitech cordless kb/mouse and it's not caused any problems.
            Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
            Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
            PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
            Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
            Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

             Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
            HTPC: Z68 Pro3 M / 2105
            SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
            SOLD:Z87X-UD5H /4770K

            Comment

            • #7
              Re: Unable to enter the Bios after a Bios update on Z77x ud5H mb.

              I plug KB and mouse into first 2 USB ports (red in rear), then everything is fine. If I plug KB into front USB ports, I can't enter BIOS because DEL key has no effect. If I plug mouse into monitor USB ports, the BIOS screen frozen. I seems BIOS has problem enumerating usb devices to find a usable KB/mouse.

              Comment

              • #8
                Re: Unable to enter the Bios after a Bios update on Z77x ud5H mb.

                According to spec and manual, UD5H USB ports consist of Intel and VIA VL810 Hubs.

                So,be sure to update this drivers to latest one:
                http://forums.tweaktown.com/gigabyte/30530-latest-overclocking-programs-system-info-benchmarking-stability-tools.html#post284763


                Also,you can try latest Beta BIOS F6l.

                Comment

                • #9
                  Re: Unable to enter the Bios after a Bios update on Z77x ud5H mb.

                  Originally posted by stasio View Post
                  According to spec and manual, UD5H USB ports consist of Intel and VIA VL810 Hubs.

                  So,be sure to update this drivers to latest one:
                  http://forums.tweaktown.com/gigabyte/30530-latest-overclocking-programs-system-info-benchmarking-stability-tools.html#post284763


                  Also,you can try latest Beta BIOS F6l.
                  My previous post is fault. The culprit cause bios hang is gamepad. I think BIOS has problem deal with some non KB-mouse USB HID devices.

                  Comment

                  • #10
                    Re: Unable to enter the Bios after a Bios update on Z77x ud5H mb.

                    With Bios F6L, the problem has not yet surfaced.

                    Comment

                    • #11
                      Re: Unable to enter the Bios after a Bios update on Z77x ud5H mb.

                      Yes. F6L solve the USB problems, includes: 1. KB is functional now 2. multi USB storage device detected. previous BIOS only show 1 device.

                      Comment

                      Previous template Next
                      Working...
                      X