I've been running this rig for a couple of years, recently up the RAM to 24Gb without problem. Recently decided to add a couple of Vertex 3 SSDs and turn the existing 2x 1Tb segates into a RAID 0 volume. I had to try and found out quickly the SATA 3 chips is way too flaky so everything is on the Intel SATA 2. I'm using it to write this but I still get a BSOD STOP F4.
Is there anything I should be looking at? I used the info from the forum to get the latest BIOS F8b and the latest Intel drivers. BIOS settings are optimized defaults except for memory profile 1 to get 1600. Do I need to teak some voltage settings?
Any help appreciated.
Corsair TX950 PS
Is there anything I should be looking at? I used the info from the forum to get the latest BIOS F8b and the latest Intel drivers. BIOS settings are optimized defaults except for memory profile 1 to get 1600. Do I need to teak some voltage settings?
Any help appreciated.
Corsair TX950 PS
Comment