Tweet
suggested OC setings for Z68 UD4 & 2500k for 4.5Ghz ?
Z68 UD4
2500k
8GB 2x4GB corsair LP low voltage 1.35v
Z68 UD4
2500k
8GB 2x4GB corsair LP low voltage 1.35v
-
-
Re: suggested OC setings for Z68 UD4 & 2500k for 4.5Ghz ?
:D should be easy, even at 'auto' ...
go to enhanced cpu features and set all 4 turbo's to 45x ... basically that is all I had to do for my first basic OC on my Z68X-UD3H-B3, with the same cpu and memory... those are the corsair whites, right?
if so select xmp profile1 and answer NO to 'enhance cpu performance', that will put them at 1600/c9/1.35v, without doing anything else.- Z68X-UD3H-B3(rev 1.3), bios F12
- I5-2500k [3148C059], cooled by scythe mugen2 rev.b with 1500rpm pwm-fan on cpufan header.
- 8G(2x4G) Corsair Vengeance LP CML8GX3M2A1600C9W,Low profile/Low voltage, DDR1600/C9-1.35v. Slots 1&2.
- 16G(4x4G) Samsung M378B5273DH0-CH9 1333 @ 2133-c11. w1.55v
- Seasonic M12D SS850-EM , 850W Semi-Modular PSU with 80A at 12V.
- 2x EVGA GeForce GTX285-1GB in SLi, 4x 6pin power and bridge connected.[PCIEX_16 and PCIEX_8]
- Hauppauge HVR2200 PCIE 1x tv-tuner card.[PCIEX1_3]
- Intel controller in raid mode.
- 2x WD 500G blacks in raid0 on intel port 0-1.
- 1x WD 1000G black on intel port 2.
- 1x OCZ Vertex2 (32nm) on intel port 3.
- 1x Optiarc DVDRW on intel port 4.
- 1x Samsung 500G on marvell port 0.
- 24" LCD monitor @ Geforce 0, lower HDMI port.
- 17" LCD monitor @ Geforce 0, upper HDMI port.
- 19" LCD tv @ intel/onboard HDMI.
- 4ch analoge speakers, cambridge dtt set.
- internal spdif header connected to Geforce 0.
- front usb connected.
- front ac97 connected.
- front cardreader (usb) connected.
- rear 4x usb bracket.
- ms media keyboard, ms comfort mouse. usb, wired.
- w7x64-sp1.
-
Re: suggested OC setings for Z68 UD4 & 2500k for 4.5Ghz ?
na wont boot like thatComment
-
Re: suggested OC setings for Z68 UD4 & 2500k for 4.5Ghz ?
disable cpu spread spectrum,disable pll overvoltage,set cpu power limit to 120% (not sure with gigabyte boards) set llc to high and voltage offset or cpu dvid to +0.050v,might be ok with qpi/vtt on auto of 1.05v and set dram voltage to 1.35v,set ram speed to 1600mhz and timings to spec
put cpu multi to 45,dont touch bclk,leave it at 100,
try that and see if you have anyluck,ideally you want/need cpu voltage around 1.36v mark for 4.5ghzGigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
http://www.youtube.com/user/warren304#p/u Visit Me On Youtube
Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!
Comment
-
Re: suggested OC setings for Z68 UD4 & 2500k for 4.5Ghz ?
Oh, I'm sorry my setting did not work for you, I did this with 2 cpu's and both did work that way, but there is no guarantees in overclocking ofcourse.
Usually the best way is to do overclocking step by step, so you don't just go to 45x, but slowly move up from the default, going multiplier by multiplier. That way you get a feel for the cpu, you will know how much vcore the particular cpu needs to get to a certain speed.
There are some tutorials for it, a nice one I found is this: Sandy Bridge Overclocking Guide , that's how I did my first 45x and how I cpu-z validated at 51x.Last edited by Darkje; 02-23-2012, 04:07 AM.- Z68X-UD3H-B3(rev 1.3), bios F12
- I5-2500k [3148C059], cooled by scythe mugen2 rev.b with 1500rpm pwm-fan on cpufan header.
- 8G(2x4G) Corsair Vengeance LP CML8GX3M2A1600C9W,Low profile/Low voltage, DDR1600/C9-1.35v. Slots 1&2.
- 16G(4x4G) Samsung M378B5273DH0-CH9 1333 @ 2133-c11. w1.55v
- Seasonic M12D SS850-EM , 850W Semi-Modular PSU with 80A at 12V.
- 2x EVGA GeForce GTX285-1GB in SLi, 4x 6pin power and bridge connected.[PCIEX_16 and PCIEX_8]
- Hauppauge HVR2200 PCIE 1x tv-tuner card.[PCIEX1_3]
- Intel controller in raid mode.
- 2x WD 500G blacks in raid0 on intel port 0-1.
- 1x WD 1000G black on intel port 2.
- 1x OCZ Vertex2 (32nm) on intel port 3.
- 1x Optiarc DVDRW on intel port 4.
- 1x Samsung 500G on marvell port 0.
- 24" LCD monitor @ Geforce 0, lower HDMI port.
- 17" LCD monitor @ Geforce 0, upper HDMI port.
- 19" LCD tv @ intel/onboard HDMI.
- 4ch analoge speakers, cambridge dtt set.
- internal spdif header connected to Geforce 0.
- front usb connected.
- front ac97 connected.
- front cardreader (usb) connected.
- rear 4x usb bracket.
- ms media keyboard, ms comfort mouse. usb, wired.
- w7x64-sp1.
Comment
-
Re: suggested OC setings for Z68 UD4 & 2500k for 4.5Ghz ?
Also, Miahallen's guides are here, Sandy Bridge Included
Comment
Comment