Hi! I'm new here, this is my first post so easy fellas on the new guy.
I have a GIGABYTE MA785GM-US2H rev 3.3 My board died 3 days ago, I powered it on hundreds of times, cleared CMOS (took battery out and used alligator clips as well since this board doesn't have jumpers) and still nothing.
The blue lights on the case don't light up and after popping in an old PCI POST card, I got 2 different codes over the 20 reboots.
I've been swapping power supplies and the codes were "E" and "0" and yes, these are single digits, not 01, 10, or E0, 1E etc.
I was wondering... It probably won't help much but what the heck; does anybody know what E or 0 means? This basically says that the chipset itself isn't even initialized this early on, right? Or could this mean that the CPU is 100% broken (or both?) Btw, the first and only code is either "E" or "0" it doesn't ever change once one of the codes show up.
I have a GIGABYTE MA785GM-US2H rev 3.3 My board died 3 days ago, I powered it on hundreds of times, cleared CMOS (took battery out and used alligator clips as well since this board doesn't have jumpers) and still nothing.
The blue lights on the case don't light up and after popping in an old PCI POST card, I got 2 different codes over the 20 reboots.
I've been swapping power supplies and the codes were "E" and "0" and yes, these are single digits, not 01, 10, or E0, 1E etc.
I was wondering... It probably won't help much but what the heck; does anybody know what E or 0 means? This basically says that the chipset itself isn't even initialized this early on, right? Or could this mean that the CPU is 100% broken (or both?) Btw, the first and only code is either "E" or "0" it doesn't ever change once one of the codes show up.
Comment