Hi all,
well i just bought a system(specs below) and i am having a few issues.
firstly when the computer boots up it stops at a screen saying Loading operating System, it halts at this screen for about 15 seconds then it continues to load windows... any reason for this?
Secondly when the system is running it often freezes or glitches. the audio goes really crackly and the colour starts to mess up, the only fix for this is a reboot. I have changed the Vcore on the chip from auto to what it should be and i have also increased the vcore on the onboard graphics a little and i have tried decreasing the onboard graphics from 1100 to 1000.
Thirdly when playing back a large Blu ray that is ripped (transformers 50 gig True HD) i get some stuttering. i know the rip is good as i have tried it on other computers. Can anyone think why this might be happening?
If i put a dedicated graphics card like a 5450 would this resolve the issues? most 5450's say that they require 400w power so if thats the case then this rig must go back.
Thanks
System
Gigabyte H67N USB3 B3 board (F7 bios)
Core i3 2105 with Intel HD3000 graphics
4 gigabyte of Kingston Hyper Ram
Thermaltake Element ITX case with 220w psu (is this enough power?)
well i just bought a system(specs below) and i am having a few issues.
firstly when the computer boots up it stops at a screen saying Loading operating System, it halts at this screen for about 15 seconds then it continues to load windows... any reason for this?
Secondly when the system is running it often freezes or glitches. the audio goes really crackly and the colour starts to mess up, the only fix for this is a reboot. I have changed the Vcore on the chip from auto to what it should be and i have also increased the vcore on the onboard graphics a little and i have tried decreasing the onboard graphics from 1100 to 1000.
Thirdly when playing back a large Blu ray that is ripped (transformers 50 gig True HD) i get some stuttering. i know the rip is good as i have tried it on other computers. Can anyone think why this might be happening?
If i put a dedicated graphics card like a 5450 would this resolve the issues? most 5450's say that they require 400w power so if thats the case then this rig must go back.
Thanks
System
Gigabyte H67N USB3 B3 board (F7 bios)
Core i3 2105 with Intel HD3000 graphics
4 gigabyte of Kingston Hyper Ram
Thermaltake Element ITX case with 220w psu (is this enough power?)
Comment