Tweet
Hi new to the forum, appreciate your help.
Just created this new system:
VGA Brand : INTEL Model : HD3000
CPU Brand : Intel Model : I5-2500K
Operation System : Win 7 64-bit
Memory Brand : Kingston Type : DDR3
Memory Size : 8GB Speed : 1333
Power Supply : 450 W
-------------------------------------------------------------------------------
Model Name : GA-Z68MA-D2H-B3(rev. 1.3)
--------------------------
M/B Rev : 1.3
BIOS Ver : F8
Problem:
When connecting my Dell E228WFP monitor to my system through the DVI port I am having a problem with the power save mode in windows 7.
In power management I set the monitor to shut off after 5 minutes.
When the time comes for the monitor to shut off the message on the monitor states "Entering Power Save". The monitor then goes black with the backlight still on for 3 seconds then the message shows again. This repeats over and over. I noticed if at this point I press the power button on the monitor and then press it again the monitor stays off until I move the mouse or hit a key on the keyboard.
Diagnosis:
I have tested the following configurations and their results:
1) Attaching another monitor via VGA port - PSM (power save mode) functions normally
2) Attaching Dell monitor via VGA port - PSM functions normally
3) Attached Samsung TV using DVI cable connecting to the TV via DVI-HDMI converter, plugging into DVI on the MBoard. - PSM did not seem to work, it flashed on the TV that the mode is not supported and would not power save.
Just created this new system:
VGA Brand : INTEL Model : HD3000
CPU Brand : Intel Model : I5-2500K
Operation System : Win 7 64-bit
Memory Brand : Kingston Type : DDR3
Memory Size : 8GB Speed : 1333
Power Supply : 450 W
-------------------------------------------------------------------------------
Model Name : GA-Z68MA-D2H-B3(rev. 1.3)
--------------------------
M/B Rev : 1.3
BIOS Ver : F8
Problem:
When connecting my Dell E228WFP monitor to my system through the DVI port I am having a problem with the power save mode in windows 7.
In power management I set the monitor to shut off after 5 minutes.
When the time comes for the monitor to shut off the message on the monitor states "Entering Power Save". The monitor then goes black with the backlight still on for 3 seconds then the message shows again. This repeats over and over. I noticed if at this point I press the power button on the monitor and then press it again the monitor stays off until I move the mouse or hit a key on the keyboard.
Diagnosis:
I have tested the following configurations and their results:
1) Attaching another monitor via VGA port - PSM (power save mode) functions normally
2) Attaching Dell monitor via VGA port - PSM functions normally
3) Attached Samsung TV using DVI cable connecting to the TV via DVI-HDMI converter, plugging into DVI on the MBoard. - PSM did not seem to work, it flashed on the TV that the mode is not supported and would not power save.
Comment