Tried a Q6600 Quad for fun
Mushkin ram Silverlines
<o:p>
These Q6600's are stilll pretty fair cpu's
</o:p>
Mushkin ram Silverlines
1. MB IntelligentTweaker(M.I.T.)<o:p></o:p>
2. Robust Graphics Booster.................[Auto]<o:p></o:p>
3. CPU Clock Ratio.........................[8x] <o:p></o:p>
4. Fine CPU ClockRatio.....................[0]<o:p></o:p>
5. CPU Frequency...........................[3.20] 400x8 <o:p></o:p>
6. <o:p> </o:p>
7. <o:p> </o:p>
8. Clock Chip Control <o:p></o:p>
9. Standard Clock Control<o:p></o:p>
10. CPU Host Clock Control..................[Enabled] <o:p></o:p>
11. CPU Host Frequency (Mhz)................[400Mhz]<o:p></o:p>
12. PCI Express Frequency(Mhz) .............[100] PCI Lock always 100<o:p></o:p>
13. <o:p> </o:p>
14. C.I.A.2 ................................[Disabled]<o:p></o:p>
15. <o:p> </o:p>
16. <o:p> </o:p>
17. Advanced Clock Control[Press Enter]<o:p></o:p>
18. CPU ClockDrive......................... [800]<o:p></o:p>
19. PCI Express ClockDrive................. ]900]<o:p></o:p>
20. CPU Clock Skew(ps)..................... [ ]<o:p></o:p>
21. MCH Clock Skew(ps)..................... [ ] <o:p></o:p>
22. <o:p> </o:p>
23. <o:p> </o:p>
24. DRAM Performance Control<o:p></o:p>
25. Performance Enhance.....................[STANDARD]<o:p></o:p>
26. Extreme Memory Profile(X.M.P.)......... [Disabled]<o:p></o:p>
27. (G)MCH FrequencyLatch.................. [400]<o:p></o:p>
28. System Memory Multiplier................SPD [2.00D] <o:p></o:p>
29. Memory Frequency (Mhz)...................[800]<o:p></o:p>
30. DRAM Timing Selectable...................[Manual]<o:p></o:p>
31. <o:p> </o:p>
32. Standard Timing Control<o:p></o:p>
33. CAS LatencyTime.........................[5]<o:p></o:p>
34. tRCD.....................................[5]<o:p></o:p>
35. tRP'....................................[5]<o:p></o:p>
36. tRAS.....................................[18]<o:p></o:p>
37. <o:p> </o:p>
38. Set all Suggested belowto highest Values first. Then later youcan lower, one at a time, testing as you go<o:p></o:p>
39. <o:p> </o:p>
40. Advanced Timing Control<o:p></o:p>
41. tRRD....................................[auto]<o:p></o:p>
42. tWTR....................................[auto]<o:p></o:p>
43. tWR.....................................[auto]<o:p></o:p>
44. tRFC....................................[auto]<o:p></o:p>
45. tRTP....................................[auto]<o:p></o:p>
46. Command Rate (CMD)..................... [2T]<o:p></o:p>
47. <o:p> </o:p>
48. Driving Strength Profiles<o:p></o:p>
49. Driving Strength........................[800mhz]<o:p></o:p>
50. <o:p> </o:p>
51. Channel A<o:p></o:p>
52. Static tReadValue.......................[9]<o:p></o:p>
53. tRD Phase0 Adjustment...................[Auto]Leave for all below as well<o:p></o:p>
54. tRD Phase1Adjustment....................[Auto]<o:p></o:p>
55. tRD Phase2 Adjustment...................[Auto]<o:p></o:p>
56. tRD Phase3 Adjustment....................[Auto]<o:p></o:p>
57. Trd2rd(DifferentRank)...................[Auto] <o:p></o:p>
58. Twr2wr(DifferentRank)...................[Auto] <o:p></o:p>
59. Twr2rd(DifferentRank)...................[Auto] <o:p></o:p>
60. Trd2wr(Same/DiffRank)...................[Auto] <o:p></o:p>
61. Dimm1 Clock Skew Control.................[Auto] <o:p></o:p>
62. Dimm2 Clock SkewControl.................[Auto] <o:p></o:p>
63. <o:p> </o:p>
64. Channel B<o:p></o:p>
65. Static tRead Value........................[9]<o:p></o:p>
66. tRD Phase0 Adjustment....................[Auto]Leave for all below as well<o:p></o:p>
67. tRD Phase1Adjustment.....................[Auto]<o:p></o:p>
68. tRD Phase2 Adjustment ...................[Auto]<o:p></o:p>
69. tRD Phase3 Adjustment....................[Auto]<o:p></o:p>
70. Trd2rd(DifferentRank)....................[Auto] <o:p></o:p>
71. Twr2wr(DifferentRank)....................[Auto] <o:p></o:p>
72. Twr2rd(DifferentRank)....................[Auto] <o:p></o:p>
73. Trd2wr(Same/DiffRank)....................[Auto] <o:p></o:p>
74. Dimm1 Clock SkewControl..................[Auto] <o:p></o:p>
75. Dimm2 Clock SkewControl..................[Auto] <o:p></o:p>
76. <o:p> </o:p>
77. Motherboard VoltageControl<o:p></o:p>
78. <o:p> </o:p>
79. CPU Q6600<o:p></o:p>
80.
Load Line[Disabled]
81. <o:p> </o:p>
82.
83. <o:p> </o:p>
84.
85. <o:p> </o:p>
86.
87. <o:p> </o:p>
88.
89. <o:p> </o:p>
90. MCH/ICH<o:p></o:p>
91.
92.
93.
94.
95.
96. <o:p> </o:p>
97. DRAM<o:p></o:p>
98.
99.
ChannelA Reference 0.900V............[0.900v]<o:p></o:p>
ChannelB Reference 0.900V............[0.900v]<o:p></o:p>
100. <o:p> </o:p>
101. Advanced Settings<o:p></o:p>
102. Limit CPUID Max. to3...............[Disabled]<o:p></o:p>
103. No-Execute MemoryProtect...........[Enabled]<o:p></o:p>
104. CPU Enhanced Halt(C1E).............[Enabled]<o:p></o:p>
105. C2/C2E StateSupport................[Disabled]<o:p></o:p>
106. x C4/C4E StateSupport..............[Disabled]<o:p></o:p>
107. CPU Thermal Monitor2(TM2) .........[Enabled]<o:p></o:p>
108. CPU EIST Function...................[Enabled]<o:p></o:p>
109. VirtualizationTechnology...........[Enabled] Enabled if you use Vmware/Virtual PC<o:p></o:p>
110. <o:p> </o:p>
111. Integrated Peripherals<o:p></o:p>
112. Legacy USB Storage Detect...........[enabled] *Note* Must be enabled to flash from USB<o:p></o:p>
<o:p> </o:p>2. Robust Graphics Booster.................[Auto]<o:p></o:p>
3. CPU Clock Ratio.........................[8x] <o:p></o:p>
4. Fine CPU ClockRatio.....................[0]<o:p></o:p>
5. CPU Frequency...........................[3.20] 400x8 <o:p></o:p>
6. <o:p> </o:p>
7. <o:p> </o:p>
8. Clock Chip Control <o:p></o:p>
9. Standard Clock Control<o:p></o:p>
10. CPU Host Clock Control..................[Enabled] <o:p></o:p>
11. CPU Host Frequency (Mhz)................[400Mhz]<o:p></o:p>
12. PCI Express Frequency(Mhz) .............[100] PCI Lock always 100<o:p></o:p>
13. <o:p> </o:p>
14. C.I.A.2 ................................[Disabled]<o:p></o:p>
15. <o:p> </o:p>
16. <o:p> </o:p>
17. Advanced Clock Control[Press Enter]<o:p></o:p>
18. CPU ClockDrive......................... [800]<o:p></o:p>
19. PCI Express ClockDrive................. ]900]<o:p></o:p>
20. CPU Clock Skew(ps)..................... [ ]<o:p></o:p>
21. MCH Clock Skew(ps)..................... [ ] <o:p></o:p>
22. <o:p> </o:p>
23. <o:p> </o:p>
24. DRAM Performance Control<o:p></o:p>
25. Performance Enhance.....................[STANDARD]<o:p></o:p>
26. Extreme Memory Profile(X.M.P.)......... [Disabled]<o:p></o:p>
27. (G)MCH FrequencyLatch.................. [400]<o:p></o:p>
28. System Memory Multiplier................SPD [2.00D] <o:p></o:p>
29. Memory Frequency (Mhz)...................[800]<o:p></o:p>
30. DRAM Timing Selectable...................[Manual]<o:p></o:p>
31. <o:p> </o:p>
32. Standard Timing Control<o:p></o:p>
33. CAS LatencyTime.........................[5]<o:p></o:p>
34. tRCD.....................................[5]<o:p></o:p>
35. tRP'....................................[5]<o:p></o:p>
36. tRAS.....................................[18]<o:p></o:p>
37. <o:p> </o:p>
38. Set all Suggested belowto highest Values first. Then later youcan lower, one at a time, testing as you go<o:p></o:p>
39. <o:p> </o:p>
40. Advanced Timing Control<o:p></o:p>
41. tRRD....................................[auto]<o:p></o:p>
42. tWTR....................................[auto]<o:p></o:p>
43. tWR.....................................[auto]<o:p></o:p>
44. tRFC....................................[auto]<o:p></o:p>
45. tRTP....................................[auto]<o:p></o:p>
46. Command Rate (CMD)..................... [2T]<o:p></o:p>
47. <o:p> </o:p>
48. Driving Strength Profiles<o:p></o:p>
49. Driving Strength........................[800mhz]<o:p></o:p>
50. <o:p> </o:p>
51. Channel A<o:p></o:p>
52. Static tReadValue.......................[9]<o:p></o:p>
53. tRD Phase0 Adjustment...................[Auto]Leave for all below as well<o:p></o:p>
54. tRD Phase1Adjustment....................[Auto]<o:p></o:p>
55. tRD Phase2 Adjustment...................[Auto]<o:p></o:p>
56. tRD Phase3 Adjustment....................[Auto]<o:p></o:p>
57. Trd2rd(DifferentRank)...................[Auto] <o:p></o:p>
58. Twr2wr(DifferentRank)...................[Auto] <o:p></o:p>
59. Twr2rd(DifferentRank)...................[Auto] <o:p></o:p>
60. Trd2wr(Same/DiffRank)...................[Auto] <o:p></o:p>
61. Dimm1 Clock Skew Control.................[Auto] <o:p></o:p>
62. Dimm2 Clock SkewControl.................[Auto] <o:p></o:p>
63. <o:p> </o:p>
64. Channel B<o:p></o:p>
65. Static tRead Value........................[9]<o:p></o:p>
66. tRD Phase0 Adjustment....................[Auto]Leave for all below as well<o:p></o:p>
67. tRD Phase1Adjustment.....................[Auto]<o:p></o:p>
68. tRD Phase2 Adjustment ...................[Auto]<o:p></o:p>
69. tRD Phase3 Adjustment....................[Auto]<o:p></o:p>
70. Trd2rd(DifferentRank)....................[Auto] <o:p></o:p>
71. Twr2wr(DifferentRank)....................[Auto] <o:p></o:p>
72. Twr2rd(DifferentRank)....................[Auto] <o:p></o:p>
73. Trd2wr(Same/DiffRank)....................[Auto] <o:p></o:p>
74. Dimm1 Clock SkewControl..................[Auto] <o:p></o:p>
75. Dimm2 Clock SkewControl..................[Auto] <o:p></o:p>
76. <o:p> </o:p>
77. Motherboard VoltageControl<o:p></o:p>
78. <o:p> </o:p>
79. CPU Q6600<o:p></o:p>
80.
Load Line[Disabled]
81. <o:p> </o:p>
82.
83. <o:p> </o:p>
84.
85. <o:p> </o:p>
86.
87. <o:p> </o:p>
88.
89. <o:p> </o:p>
90. MCH/ICH<o:p></o:p>
91.
92.
93.
94.
95.
96. <o:p> </o:p>
97. DRAM<o:p></o:p>
98.
99.
ChannelA Reference 0.900V............[0.900v]<o:p></o:p>
ChannelB Reference 0.900V............[0.900v]<o:p></o:p>
100. <o:p> </o:p>
101. Advanced Settings<o:p></o:p>
102. Limit CPUID Max. to3...............[Disabled]<o:p></o:p>
103. No-Execute MemoryProtect...........[Enabled]<o:p></o:p>
104. CPU Enhanced Halt(C1E).............[Enabled]<o:p></o:p>
105. C2/C2E StateSupport................[Disabled]<o:p></o:p>
106. x C4/C4E StateSupport..............[Disabled]<o:p></o:p>
107. CPU Thermal Monitor2(TM2) .........[Enabled]<o:p></o:p>
108. CPU EIST Function...................[Enabled]<o:p></o:p>
109. VirtualizationTechnology...........[Enabled] Enabled if you use Vmware/Virtual PC<o:p></o:p>
110. <o:p> </o:p>
111. Integrated Peripherals<o:p></o:p>
112. Legacy USB Storage Detect...........[enabled] *Note* Must be enabled to flash from USB<o:p></o:p>
<o:p>
These Q6600's are stilll pretty fair cpu's
</o:p>