Announcement

**Chike** · 09-23-2011, 06:04 PM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

That usually the message you get after a BSOD. If windows is set to reboot automatically that's probably what happened.
Look at the event viewer for critical events and see if you can find the BSOD code(if there is one).

**jake8078** · 09-23-2011, 06:36 PM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

I was unable to pinpoint the error code, as I couldn't remember the exact time. I'll make sure I check it right away after next time - didn't even know you could do that

I clicked down to 473 x 9 x 946.
Memtest #5 (1) pass was successful, as was IBT (2 minutes idle at desktop):

<img src = http://img708.imageshack.us/img708/2482/ibt2minuteidle.png>

I can run Long FFT now, unless you want me to switch it back to 4.25 and try to repeat the error?

**Chike** · 09-23-2011, 06:45 PM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

Going up with CPU frequency with no gain in GFlops is meaningless. See if you get more few clicks above.
Try a going up FSB to find the point it fails.

**jake8078** · 09-23-2011, 06:46 PM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

While I was waiting to hear back I figured I would try to repeat the test. Think I found it:

Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 9/23/2011 7:41:14 PM
Event ID: 1001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: ACORN
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xfffffa80068cd038, 0x00000000b2000040, 0x0000000000000800). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 092311-4836-01.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-23T23:41:14.000000000Z" />
<EventRecordID>19265</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>ACORN</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">0x00000124 (0x0000000000000000, 0xfffffa80068cd038, 0x00000000b2000040, 0x0000000000000800)</Data>
<Data Name="param2">C:\Windows\MEMORY.DMP</Data>
<Data Name="param3">092311-4836-01</Data>
</EventData>
</Event>

**Chike** · 09-23-2011, 06:52 PM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

0x00000124 is VTT/references settings.
Set VTT up a notch or 2, then we must work the references, but we need less stable settings so memtest86+ will fail, takes too long to boot to windows with each change.

**jake8078** · 09-23-2011, 06:55 PM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

Sounds good, so I'll run 3.25 again and work the references the way you described in previous posts (after trying VVT). Should I leave VVT at 1-2 up while I work the references, or switch it back down if it doesn't help?

**Chike** · 09-23-2011, 06:58 PM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

Leave it up one click, but remember to make the changes when it is set to 1.2 and then set it back to 1.22.

**jake8078** · 09-24-2011, 11:02 AM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

With settings at 473 x 9.0 x 946 (2.00D), I followed the methods in post #140 to adjust references, VTT, and clock skews. Here are my attempts:

Changed VVT to 1.22:
Failed IBT - BSOD

Changed VVT to 1.24:
Failed IBT - BSOD

Clicked down VVT to 1.22 for all the remaining tests as per:

Originally posted by Chike View Post

Leave it up one click, but remember to make the changes when it is set to 1.2 and then set it back to 1.22.

Then, Changed MCH Ref to 0.720:
Failed IBT - BSOD

MCH Reference to 0.700
Failed IBT - BSOD

MCH Reference to 0.680
Failed IBT - BSOD

Then changed MCH Core to 1.240 for the following tests:
MCH Reference 0.720:
Failed IBT - BSOD

MCH Reference 0.74:
Failed IBT - BSOD

With MCH Reference at 0.74, I changed CPU Reference (with all references, I did remember to click down VTT first, so they're reported in their adjusted settings).
CPU Reference 0.772:
Failed IBT - BSOD

CPU Reference 0.797:
Failed IBT - BSOD

CPU Reference 0.812:
Failed IBT - BSOD

Changed MCH Reference to 0.72 and then the following CPU References:
CPU Reference 0.772:
Failed IBT - BSOD

CPU Reference 0.797:
Failed IBT - BSOD

CPU Reference 0.812:
Failed IBT - BSOD

Changed MCH Reference to 0.700 and then the following CPU References:
CPU Reference 0.772:
Failed IBT - BSOD

CPU Reference 0.797:
Failed IBT - BSOD

CPU Reference 0.812:
Failed IBT - BSOD

Changed MCH Reference to 0.720 and then the following CPU References:
CPU Reference 0.772:
Failed IBT - BSOD

CPU Reference 0.797:
Failed IBT - BSOD

CPU Reference 0.812:
Failed IBT - BSOD

Changed MCH Reference to 0.720 as per:

Originally posted by Chike View Post

Then(if still not stable) lower CPU Reference with MCH Reference 0.72(which you skipped last time)

CPU Reference 0.757:
Failed IBT - BSOD

CPU Reference 0.742:
Failed IBT - BSOD

CPU Reference 0.727:
Failed IBT - BSOD

CPU Reference 0.712:
Failed IBT - BSOD

CPU Reference 0.697:
BSOD at Windows boot

CPU Reference 0.682:
Automatic reboot once it got to windows loading

I'm now working on these instructions:

Originally posted by Chike View Post

If still not stable try higher VTT (1.22, 1.24) repeating MCH Reference test (074, 0.72, 0.70, CPU Reference at auto) then with CPU above and below default.

I would also try 50-100ps on each of the clock skews(the other on 0) with the most stable(but not nesessaraly stable) settings for each VTT (1.2, 1.22, 1.24)

So far I've done the following:

With VVT at 1.240,

MCH Reference 0.74:
Failed IBT - BSOD

MCH Reference 0.72:
Failed IBT - BSOD

MCH Reference 0.70:
Failed IBT - BSOD

I will continue with CPU above and below default with the higher VVT (1.24) and the difference MCH References. Then I will try the clock skews. I'll check back periodically in case you'd rather try something else based on the data. I was, unfortunately, doing several things at once during these tests so I was unable to record the BSOD screen, and just assumed we were running into the same one every time. That probably wasn't necessarily a good assumption, and I found out how to disable windows automatic reboot so will be able to capture the BSOD code going forward.

**Chike** · 09-24-2011, 11:22 AM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

Try higher vcore also, so you experimenting with clock skews now?

To disable automatic reboot:
right click (my) comuter
click propertires
click advanced system settings(win 7) / select advanced(xp)
click startup and recovery :settings"
uncheck "automaticaly restart"
click OK
click OK

Strange enough, my "automaticaly restart is checked and I still get the BSOD, could be because of the write to dump file?

**jake8078** · 09-24-2011, 11:32 AM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

Originally posted by Chike View Post

Try higher vcore also, so you experimenting with clock skews now?

To disable automatic reboot:
right click (my) comuter
click propertires
click advanced system settings(win 7) / select advanced(xp)
click startup and recovery :settings"
uncheck "automaticaly restart"
click OK
click OK

Strange enough, my "automaticaly restart is checked and I still get the BSOD, could be because of the write to dump file?

Yes, I unchecked to automatically restart, and with VVt 1.24, MCH Ref 0.74 and CPU Ref 0.810 I got a BSOD and took a photo with my iphone:

0x00000124 was the code. Also Windows provided me details on restart as:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA80068CC038
BCP3: 00000000B2000040
BCP4: 0000000000000800
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\092411-5787-01.dmp
C:\Users\Jake\AppData\Local\Temp\WER-17456-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Right now, I'm trying the previous method but with VVT at 1.24 (first the MCH references, then CPU references while at the various MCH References (0.74, 0.72, 0.70). The previous combinations I tried with references were with VVT at 1.22, so I'm trying this. If you'd rather me try the skews first I can do that too - just let me know which MCH / CPU references to try them at - MCH at 0.74 and VVT 1.22 I would guess?

**profJim** · 09-24-2011, 11:39 AM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

Take a look at Dan's E8400 settings.
I'm NOT recommending that you try these settings, but just to see what it took using a brute force approach without using skew settings.

Code:

DanW 4.250GHz 500x8.5 Bios Settings
***************************************
***************************************
Gigabyte GA-EP45-UD3P (Rev. 1.0) - F10e
***************************************
***************************************

******************************
MB Intelligent Tweaker(M.I.T.) 
******************************
Robust Graphics Booster ..............: [Auto]
CPU Clock Ratio ......................: [8X]
x Fine CPU Clock Ratio................: +0.5
CPU Frequency ........................: 4.25GHz( 500x8.5)

********** Clock Chip Control ********

>>>>>  Standard Clock Control
CPU Host Clock Control................: [Enabled]
x CPU Host Frequency(Mhz).............: [ 500]
PCI Express Frequency(Mhz)............: [100]
C.I.A.2...............................: [Disabled]

>>>>> Advanced Clock Control..........: [Press Enter] 
CPU Clock Drive.......................: [800mV]
PCI Express Clock Drive...............: [900mV]
CPU Clock Skew........................: [  0ps]
MCH Clock Skew........................: [  0ps]

******** DRAM Performance Control ********

Performance Enhance...................: [Standard]
Extreme Memory Profile(X.M.P.)........: [Disabled]
(G)MCH Frequency Latch................: [Auto]
System Memory Multiplier (SPD)........: [2.00D]
Memory Frequency(Mhz).....800.........: 1000
DRAM Timing Selectable (SPD)..........: [Manual]

>>>>> Standard Timing Control
x CAS Latency Time................5...: [5]
x tRCD ...........................5...: [5]
x tRP.............................5...: [5]
x tRAS...........................15...: [15]

>>>>> Advanced Timing Control.........: [Press Enter] 
x tRRD............................3...: Auto
x tWTR............................3...: Auto
x tWR.............................6...: Auto
x tRFC...........................52...: Auto
x tRTP............................3...: Auto
x Command Rate (CMD) .............0...: Auto

>>>>> Channel A Timing Settings.......: [Press Enter] 
x Static tRead Value.............11...: [ 9]
x tRD Phase0 Adjustment...........0...: Auto
x tRD Phase1 Adjustment...........0...: Auto
x tRD Phase2 Adjustment ..........0...: Auto
x tRD Phase3 Adjustment...........0...: Auto

x Trd2rd(Different Rank)..........6...: Auto
x Twr2wr(Different Rank)..........6...: Auto
x Twr2rd(Different Rank)..........5...: Auto
x Trd2wr(Same/Diff Rank)..........8...: Auto

x DIMM1 Clock Skew Control (ps).......: Auto
x DIMM2 Clock Skew Control (ps).......: Auto
x DDR Write Training..................: Auto

>>>>> Channel A Driving Settings......: [Press Enter] 
x Driving Strength Profile............: [1066Mhz]

x Data Driving Pull-Up Level..........: Auto
x Cmd Driving Pull-Up level...........: Auto
x Ctrl Driving Pull-Up Level..........: Auto
x Clk Driving Pull-Up Level...........: Auto

x Data Driving Pull-Down Level........: Auto
x Cmd Driving Pull-Down level.........: Auto
x Ctrl Driving Pull-Down Level........: Auto
x Clk Driving Pull-Down Level.........: Auto

>>>>> Channel B Timing Settings.......: [Press Enter] 
x Static tRead Value.............11...: [ 9]
x tRD Phase0 Adjustment...........0...: Auto
x tRD Phase1 Adjustment...........0...: Auto
x tRD Phase2 Adjustment ..........0...: Auto
x tRD Phase3 Adjustment...........0...: Auto

x Trd2rd(Different Rank)..........6...: Auto
x Twr2wr(Different Rank)..........6...: Auto
x Twr2rd(Different Rank)..........5...: Auto
x Trd2wr(Same/Diff Rank)..........8...: Auto

x DIMM1 Clock Skew Control (ps).......: Auto
x DIMM2 Clock Skew Control (ps).......: Auto
x DDR Write Training..................: Auto

>>>>> Channel B Driving Settings......: [Press Enter] 
x Driving Strength Profile............: [1066Mhz]

x Data Driving Pull-Up Level..........: Auto
x Cmd Driving Pull-Up level...........: Auto
x Ctrl Driving Pull-Up Level..........: Auto
x Clk Driving Pull-Up Level...........: Auto

x Data Driving Pull-Down Level........: Auto
x Cmd Driving Pull-Down level.........: Auto
x Ctrl Driving Pull-Down Level........: Auto
x Clk Driving Pull-Down Level.........: Auto

****** Motherboard Voltage Control ******

Voltage Types..........Normal...........Current
-----------------------------------------------
>>> CPU
Load-Line Calibration.................: [Disabled]
CPU Vcore..............1.27500V.......: [[B][COLOR="#FF0000"]1.38750V[/COLOR][/B]]
CPU Termination........1.200V.........: [[B][COLOR="#FF0000"]1.320V[/COLOR][/B]]
CPU PLL................1.500V.........: [[B][COLOR="#FF0000"]1.570V[/COLOR][/B]]
CPU Reference..........0.760V.........: [[B][COLOR="#FF0000"]Normal[/COLOR][/B]]
>>> MCH/ICH
MCH Core...............1.100V.........: [[B][COLOR="#FF0000"]1.320V[/COLOR][/B]] [B]<-- 4 x 1GB memory[/B]
MCH Reference..........0.760V.........: [[B][COLOR="#FF0000"]0.796V[/COLOR][/B]] [B](0.720V with CPU Termination @ 1.200V)[/B]
MCH/DRAM Reference.....0.900V.........: [Normal]
ICH I/O................1.500V.........: [1.500V]
ICH Core...............1.100V.........: [[B][COLOR="#FF0000"]1.200V[/COLOR][/B]]
>>> DRAM
DRAM Voltage...........1.800V.........: [2.020V]
DRAM Termination.......0.900V.........: [Normal]
Channel A Reference....0.900V.........: [Normal]
Channel B Reference....0.900V.........: [Normal]

******** Advanced BIOS Features ********
Hard Disk Boot Priority...............: [Press Enter]
First Boot Device.....................: [USB-HDD]
Second Boot Device....................: [Hard Disk]
Third Boot Device.....................: [CDROM]
Password Check........................: [Setup]
HDD S.M.A.R.T. Capability.............: [Enabled]
Limit CPUID Max. to 3.................: [Disabled]
No-Execute Memory Protect.............: [Enabled]
CPU Enhanced Halt (C1E)...............: [Disabled]
C2/C2E State Support..................: [Disabled]
x C4/C4E State Support................:  Disabled
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.....................: [Disabled]
Virtualization Technology.............: [Disabled]
Delay For HDD (Secs)..................: [ 0]
Full Screen LOGO Show.................: [Disabled]
Backup BIOS Image to HDD..............: [Enabled]
Init Display First....................: [PEG]

******** Integrated Peripherals ********
USB Keyboard Function.................: [Enabled]
USB Mouse Function....................: [Enabled]
USB Storage Function..................: [Disabled]

**jake8078** · 09-24-2011, 11:53 AM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

Originally posted by profJim View Post

Take a look at Dan's E8400 settings.
I'm NOT recommending that you try these settings, but just to see what it took using a brute force approach without using skew settings.

Code:

DanW 4.250GHz 500x8.5 Bios Settings
***************************************
***************************************
Gigabyte GA-EP45-UD3P (Rev. 1.0) - F10e
***************************************
***************************************

******************************
MB Intelligent Tweaker(M.I.T.) 
******************************
Robust Graphics Booster ..............: [Auto]
CPU Clock Ratio ......................: [8X]
x Fine CPU Clock Ratio................: +0.5
CPU Frequency ........................: 4.25GHz( 500x8.5)

********** Clock Chip Control ********

>>>>>  Standard Clock Control
CPU Host Clock Control................: [Enabled]
x CPU Host Frequency(Mhz).............: [ 500]
PCI Express Frequency(Mhz)............: [100]
C.I.A.2...............................: [Disabled]

>>>>> Advanced Clock Control..........: [Press Enter] 
CPU Clock Drive.......................: [800mV]
PCI Express Clock Drive...............: [900mV]
CPU Clock Skew........................: [  0ps]
MCH Clock Skew........................: [  0ps]

******** DRAM Performance Control ********

Performance Enhance...................: [Standard]
Extreme Memory Profile(X.M.P.)........: [Disabled]
(G)MCH Frequency Latch................: [Auto]
System Memory Multiplier (SPD)........: [2.00D]
Memory Frequency(Mhz).....800.........: 1000
DRAM Timing Selectable (SPD)..........: [Manual]

>>>>> Standard Timing Control
x CAS Latency Time................5...: [5]
x tRCD ...........................5...: [5]
x tRP.............................5...: [5]
x tRAS...........................15...: [15]

>>>>> Advanced Timing Control.........: [Press Enter] 
x tRRD............................3...: Auto
x tWTR............................3...: Auto
x tWR.............................6...: Auto
x tRFC...........................52...: Auto
x tRTP............................3...: Auto
x Command Rate (CMD) .............0...: Auto

>>>>> Channel A Timing Settings.......: [Press Enter] 
x Static tRead Value.............11...: [ 9]
x tRD Phase0 Adjustment...........0...: Auto
x tRD Phase1 Adjustment...........0...: Auto
x tRD Phase2 Adjustment ..........0...: Auto
x tRD Phase3 Adjustment...........0...: Auto

x Trd2rd(Different Rank)..........6...: Auto
x Twr2wr(Different Rank)..........6...: Auto
x Twr2rd(Different Rank)..........5...: Auto
x Trd2wr(Same/Diff Rank)..........8...: Auto

x DIMM1 Clock Skew Control (ps).......: Auto
x DIMM2 Clock Skew Control (ps).......: Auto
x DDR Write Training..................: Auto

>>>>> Channel A Driving Settings......: [Press Enter] 
x Driving Strength Profile............: [1066Mhz]

x Data Driving Pull-Up Level..........: Auto
x Cmd Driving Pull-Up level...........: Auto
x Ctrl Driving Pull-Up Level..........: Auto
x Clk Driving Pull-Up Level...........: Auto

x Data Driving Pull-Down Level........: Auto
x Cmd Driving Pull-Down level.........: Auto
x Ctrl Driving Pull-Down Level........: Auto
x Clk Driving Pull-Down Level.........: Auto

>>>>> Channel B Timing Settings.......: [Press Enter] 
x Static tRead Value.............11...: [ 9]
x tRD Phase0 Adjustment...........0...: Auto
x tRD Phase1 Adjustment...........0...: Auto
x tRD Phase2 Adjustment ..........0...: Auto
x tRD Phase3 Adjustment...........0...: Auto

x Trd2rd(Different Rank)..........6...: Auto
x Twr2wr(Different Rank)..........6...: Auto
x Twr2rd(Different Rank)..........5...: Auto
x Trd2wr(Same/Diff Rank)..........8...: Auto

x DIMM1 Clock Skew Control (ps).......: Auto
x DIMM2 Clock Skew Control (ps).......: Auto
x DDR Write Training..................: Auto

>>>>> Channel B Driving Settings......: [Press Enter] 
x Driving Strength Profile............: [1066Mhz]

x Data Driving Pull-Up Level..........: Auto
x Cmd Driving Pull-Up level...........: Auto
x Ctrl Driving Pull-Up Level..........: Auto
x Clk Driving Pull-Up Level...........: Auto

x Data Driving Pull-Down Level........: Auto
x Cmd Driving Pull-Down level.........: Auto
x Ctrl Driving Pull-Down Level........: Auto
x Clk Driving Pull-Down Level.........: Auto

****** Motherboard Voltage Control ******

Voltage Types..........Normal...........Current
-----------------------------------------------
>>> CPU
Load-Line Calibration.................: [Disabled]
CPU Vcore..............1.27500V.......: [[B][COLOR="#FF0000"]1.38750V[/COLOR][/B]]
CPU Termination........1.200V.........: [[B][COLOR="#FF0000"]1.320V[/COLOR][/B]]
CPU PLL................1.500V.........: [[B][COLOR="#FF0000"]1.570V[/COLOR][/B]]
CPU Reference..........0.760V.........: [[B][COLOR="#FF0000"]Normal[/COLOR][/B]]
>>> MCH/ICH
MCH Core...............1.100V.........: [[B][COLOR="#FF0000"]1.320V[/COLOR][/B]] [B]<-- 4 x 1GB memory[/B]
MCH Reference..........0.760V.........: [[B][COLOR="#FF0000"]0.796V[/COLOR][/B]] [B](0.720V with CPU Termination @ 1.200V)[/B]
MCH/DRAM Reference.....0.900V.........: [Normal]
ICH I/O................1.500V.........: [1.500V]
ICH Core...............1.100V.........: [[B][COLOR="#FF0000"]1.200V[/COLOR][/B]]
>>> DRAM
DRAM Voltage...........1.800V.........: [2.020V]
DRAM Termination.......0.900V.........: [Normal]
Channel A Reference....0.900V.........: [Normal]
Channel B Reference....0.900V.........: [Normal]

******** Advanced BIOS Features ********
Hard Disk Boot Priority...............: [Press Enter]
First Boot Device.....................: [USB-HDD]
Second Boot Device....................: [Hard Disk]
Third Boot Device.....................: [CDROM]
Password Check........................: [Setup]
HDD S.M.A.R.T. Capability.............: [Enabled]
Limit CPUID Max. to 3.................: [Disabled]
No-Execute Memory Protect.............: [Enabled]
CPU Enhanced Halt (C1E)...............: [Disabled]
C2/C2E State Support..................: [Disabled]
x C4/C4E State Support................:  Disabled
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.....................: [Disabled]
Virtualization Technology.............: [Disabled]
Delay For HDD (Secs)..................: [ 0]
Full Screen LOGO Show.................: [Disabled]
Backup BIOS Image to HDD..............: [Enabled]
Init Display First....................: [PEG]

******** Integrated Peripherals ********
USB Keyboard Function.................: [Enabled]
USB Mouse Function....................: [Enabled]
USB Storage Function..................: [Disabled]

Whoah, over 0.1 V Vcore above stock and an extremely high MCH Reference -- that can't be good...

**jake8078** · 09-24-2011, 11:57 AM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

At VVT 1.240, MCH Ref 0.72, CPU Ref 0.810 (Sorry, through all these tests I've been giving MCH Ref at their stock vvt value and CPU Reference at their adjusted. I should probably be more consistent):

Instead of BSOD I got:

<img src = http://img607.imageshack.us/img607/2073/ibt.png>
<img src = http://img685.imageshack.us/img685/5896/ibt2.png>

I'm not sure if this is useful information, but figured I would report it anyways. I did get this same thing once before at other settings, but forgot to take a screen shot. Upon trying to reproduce it, I had gotten a BSOD the second time.

EDIT: I ran the test again at the same settings, and got the same error (unlike last time, upon which - as described - I got a BSOD the second time).

**Chike** · 09-24-2011, 11:59 AM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

BSODS still 124? Pumo vcore up 1.325-1.35v.

**jake8078** · 09-24-2011, 12:00 PM

Re: ED45-UD3p with 8400 Dual Core overclock help! :)

Originally posted by Chike View Post

BSODS still 124?

Yes, so far.

Component	Purchased	Link
Case	June 2009	Rosewill R5601-BK
Motherboard - Rev 1.1 BIOS F10	June 2009	GIGABYTE GA-EP45-UD3P LGA 775 Intel P45.
CPU	June 2009	Intel Core 2 Duo E8400 Wolfdale 3.0GHz 6MB L2 Cache LGA 775 65W Dual-Core Processor BX80570E8400
Cooler	Sept 2011	ZALMAN CNPS10X Performa
Graphics Card	June 2009	EVGA 896-P3-1262-AR GeForce GTX 260 Superclocked Edition
PSU	June 2009	Thermaltake W0116RU 750W
Memory	June 2009	G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) F2-8500CL5D-4GBPK
Boot Drive	Sept 2011	Crucial M4 CT128M4SSD2 2.5" 128GB SSD
Data Drives (2x in Raid 0)	June 2009	Western Digital Caviar Blue WD6400AAKS 640GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5"
Display	June 2009	Samsung T240HD

Component	Purchased	Link
Case	June 2009	Rosewill R5601-BK
Motherboard - Rev 1.1 BIOS F10	June 2009	GIGABYTE GA-EP45-UD3P LGA 775 Intel P45.
CPU	June 2009	Intel Core 2 Duo E8400 Wolfdale 3.0GHz 6MB L2 Cache LGA 775 65W Dual-Core Processor BX80570E8400
Cooler	Sept 2011	ZALMAN CNPS10X Performa
Graphics Card	June 2009	EVGA 896-P3-1262-AR GeForce GTX 260 Superclocked Edition
PSU	June 2009	Thermaltake W0116RU 750W
Memory	June 2009	G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) F2-8500CL5D-4GBPK
Boot Drive	Sept 2011	Crucial M4 CT128M4SSD2 2.5" 128GB SSD
Data Drives (2x in Raid 0)	June 2009	Western Digital Caviar Blue WD6400AAKS 640GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5"
Display	June 2009	Samsung T240HD

Component	Purchased	Link
Case	June 2009	Rosewill R5601-BK
Motherboard - Rev 1.1 BIOS F10	June 2009	GIGABYTE GA-EP45-UD3P LGA 775 Intel P45.
CPU	June 2009	Intel Core 2 Duo E8400 Wolfdale 3.0GHz 6MB L2 Cache LGA 775 65W Dual-Core Processor BX80570E8400
Cooler	Sept 2011	ZALMAN CNPS10X Performa
Graphics Card	June 2009	EVGA 896-P3-1262-AR GeForce GTX 260 Superclocked Edition
PSU	June 2009	Thermaltake W0116RU 750W
Memory	June 2009	G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) F2-8500CL5D-4GBPK
Boot Drive	Sept 2011	Crucial M4 CT128M4SSD2 2.5" 128GB SSD
Data Drives (2x in Raid 0)	June 2009	Western Digital Caviar Blue WD6400AAKS 640GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5"
Display	June 2009	Samsung T240HD

Component	Purchased	Link
Case	June 2009	Rosewill R5601-BK
Motherboard - Rev 1.1 BIOS F10	June 2009	GIGABYTE GA-EP45-UD3P LGA 775 Intel P45.
CPU	June 2009	Intel Core 2 Duo E8400 Wolfdale 3.0GHz 6MB L2 Cache LGA 775 65W Dual-Core Processor BX80570E8400
Cooler	Sept 2011	ZALMAN CNPS10X Performa
Graphics Card	June 2009	EVGA 896-P3-1262-AR GeForce GTX 260 Superclocked Edition
PSU	June 2009	Thermaltake W0116RU 750W
Memory	June 2009	G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) F2-8500CL5D-4GBPK
Boot Drive	Sept 2011	Crucial M4 CT128M4SSD2 2.5" 128GB SSD
Data Drives (2x in Raid 0)	June 2009	Western Digital Caviar Blue WD6400AAKS 640GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5"
Display	June 2009	Samsung T240HD

Component	Purchased	Link
Case	June 2009	Rosewill R5601-BK
Motherboard - Rev 1.1 BIOS F10	June 2009	GIGABYTE GA-EP45-UD3P LGA 775 Intel P45.
CPU	June 2009	Intel Core 2 Duo E8400 Wolfdale 3.0GHz 6MB L2 Cache LGA 775 65W Dual-Core Processor BX80570E8400
Cooler	Sept 2011	ZALMAN CNPS10X Performa
Graphics Card	June 2009	EVGA 896-P3-1262-AR GeForce GTX 260 Superclocked Edition
PSU	June 2009	Thermaltake W0116RU 750W
Memory	June 2009	G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) F2-8500CL5D-4GBPK
Boot Drive	Sept 2011	Crucial M4 CT128M4SSD2 2.5" 128GB SSD
Data Drives (2x in Raid 0)	June 2009	Western Digital Caviar Blue WD6400AAKS 640GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5"
Display	June 2009	Samsung T240HD

Announcement

ED45-UD3p with 8400 Dual Core overclock help! :)

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment