Mainboard : GA ep45t udl3r 2200 mhz+
Cpu : Q 9650 3.0 Ghz
CPU cooler : Zalman Cnps 10x extreme
Graphic Card: GTX 260 Amp2
Ram: Corsair Dominator 1600 mhz cl 8
Power supply: Xilence 1000 watt
Case : HAF 932
[i looked this settings from the Everest program]
1600 mhz cl8 timings
tRRD[6].........................................[ 6 ]
tWTR[6].........................................[ 6 ]
tWR[12].........................................[ 12 ]
tRFC[88]........................................[ 88 ]
tRTP[5].........................................[ 6 ]
Command Rate (cmd)[0]...........................[ 1 ]
I'm suffering from blue screen problem
Although i applied the bios settings that showed below, it cannot provide stability and i'm taking BSOD(Blue Screen of Death)
Motherboard Intelligent Tweaker
Robust Graphics Booster.........................[ Auto ]
CPU Clock Ratio.................................[ 9x ]
Fine CPU Clock Ratio............................[ + 0.0 ]
CPU Frequency 4.14GHz...........................[ 445x9 ]
Clock Chip Control
CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 445 ]
PCI Express Frequency (Mhz).....................[ Auto ]
C.I.A 2.........................................[ Disabled ]
Advanced Clock Control
CPU Clock Drive.................................[ 900mv ]
PCI Express Clock Drive.........................[ 900mv ]
CPU Clock Skew..................................[ 0ps ]
MCH Clock Skew..................................[ 50ps ]
DRAM Performance Control
Performance Enhance.............................[ Turbo ]
Extreme Memory Profile(X.M.P.) [ Disabled ]
(G) MCH Frequency Latch.........................[ Auto ]
System Memory Multipler.........................[ 4.00D ]
Memory Frequency 1066...........................[ 1780 ]
DRAM Timing Selectable..........................[ Manual ]
CAS Latency Time................................[ 8 ]
tRCD............................................[ 8 ]
tRP.............................................[ 8 ]
tRAS............................................[ 24 ]
tRRD[4].........................................[ 6 ]
tWTR[5].........................................[ 6 ]
tWR[14].........................................[ 10 ]
tRFC[74]........................................[ 88 ]
tRTP[5].........................................[ 6 ]
Command Rate (cmd)[0]...........................[ 1 ]
Channel A Timing Settings
Static tRead Value (PL) [ ] ................[ 9 ]
Channel B Timing Settings
Static tRead Value (PL) [ ] ................[ 9 ]
Motherboard Voltage Control
Load-Line Calibration...........................[ Enabled ]
CPU Vcore [ ]...................[ 1.32500 ]
CPU Termination [ ]...................[ 1.200 ]
CPU PLL [ ]...................[ 1.55 ]
CPU Reference [ ]...................[ Auto ]
MCH Core [ ]...................[ 1.100 ]
MCH Reference [ ]...................[ Auto ]
MCH/DRAM Refernce [ ]...................[ Auto ]
ICH I/O [ ]...................[ Normal ]
ICH Core [ ]...................[ 1.100 ]
DRAM Voltage [ ]...................[ 1.98 ]
DRAM Termination [ ]...................[ Normal ]
Cpu : Q 9650 3.0 Ghz
CPU cooler : Zalman Cnps 10x extreme
Graphic Card: GTX 260 Amp2
Ram: Corsair Dominator 1600 mhz cl 8
Power supply: Xilence 1000 watt
Case : HAF 932
[i looked this settings from the Everest program]
1600 mhz cl8 timings
tRRD[6].........................................[ 6 ]
tWTR[6].........................................[ 6 ]
tWR[12].........................................[ 12 ]
tRFC[88]........................................[ 88 ]
tRTP[5].........................................[ 6 ]
Command Rate (cmd)[0]...........................[ 1 ]
I'm suffering from blue screen problem
Although i applied the bios settings that showed below, it cannot provide stability and i'm taking BSOD(Blue Screen of Death)
Motherboard Intelligent Tweaker
Robust Graphics Booster.........................[ Auto ]
CPU Clock Ratio.................................[ 9x ]
Fine CPU Clock Ratio............................[ + 0.0 ]
CPU Frequency 4.14GHz...........................[ 445x9 ]
Clock Chip Control
CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 445 ]
PCI Express Frequency (Mhz).....................[ Auto ]
C.I.A 2.........................................[ Disabled ]
Advanced Clock Control
CPU Clock Drive.................................[ 900mv ]
PCI Express Clock Drive.........................[ 900mv ]
CPU Clock Skew..................................[ 0ps ]
MCH Clock Skew..................................[ 50ps ]
DRAM Performance Control
Performance Enhance.............................[ Turbo ]
Extreme Memory Profile(X.M.P.) [ Disabled ]
(G) MCH Frequency Latch.........................[ Auto ]
System Memory Multipler.........................[ 4.00D ]
Memory Frequency 1066...........................[ 1780 ]
DRAM Timing Selectable..........................[ Manual ]
CAS Latency Time................................[ 8 ]
tRCD............................................[ 8 ]
tRP.............................................[ 8 ]
tRAS............................................[ 24 ]
tRRD[4].........................................[ 6 ]
tWTR[5].........................................[ 6 ]
tWR[14].........................................[ 10 ]
tRFC[74]........................................[ 88 ]
tRTP[5].........................................[ 6 ]
Command Rate (cmd)[0]...........................[ 1 ]
Channel A Timing Settings
Static tRead Value (PL) [ ] ................[ 9 ]
Channel B Timing Settings
Static tRead Value (PL) [ ] ................[ 9 ]
Motherboard Voltage Control
Load-Line Calibration...........................[ Enabled ]
CPU Vcore [ ]...................[ 1.32500 ]
CPU Termination [ ]...................[ 1.200 ]
CPU PLL [ ]...................[ 1.55 ]
CPU Reference [ ]...................[ Auto ]
MCH Core [ ]...................[ 1.100 ]
MCH Reference [ ]...................[ Auto ]
MCH/DRAM Refernce [ ]...................[ Auto ]
ICH I/O [ ]...................[ Normal ]
ICH Core [ ]...................[ 1.100 ]
DRAM Voltage [ ]...................[ 1.98 ]
DRAM Termination [ ]...................[ Normal ]
Comment