GA-H67MA-UD2H-B3 v1.1 (Bios F4) reporting strange values

[Geor9e]

New build, all running nicely afaik....

CPUID HWMonitor is displaying some weird data, as per pic.

Although I'm using a cheapo PSU, I'd presume that if these values were really true, the system would not actually boot?

I'm using one 4 pin P4 +12v connection, btw.

Can anyone advise on these values, as I'm not a massive tweaker, but I'm a bit worried about this.



setup:

Windows Home Premium SP1 64bits running on...

Gigabyte GA-H67MA-UD2H-B3 v1.1 (Bios F4)
Intel Core i5-2500 & stock cooler
2 x Nanya Technology Elixir DDR3 PC-10600 1333Mhz 4GB
GFX#1 - Intel IGP
GFX#2 - Asus Geforce EN210 1GB PCI-E 16x
4 x Samsung EX2220X LCD
Intel X25-M 80GB
550W PSU

[wazza300]

Re: GA-H67MA-UD2H-B3 v1.1 (Bios F4) reporting strange values

What values are you worried about in that pic? Voltages look ok to me,any voltages you want to check,check them in the bios or in easytune/advanced/voltage 1 ,they will be the most accurate

[Geor9e]

Re: GA-H67MA-UD2H-B3 v1.1 (Bios F4) reporting strange values

What values are you worried about in that pic?

Voltage 2 2.94 Volts [0xF5] (+3.3V)
Voltage 3 2.80 Volts [0x8B] (+5V)
Voltage 4 2.93 Volts [0x3D] (+12V)
Voltage 5 -4.90 Volts [0x66] (-12V)
Voltage 6 -6.14 Volts [0x80] (-5V)
Voltage 7 2.84 Volts [0x8D] (+5V VCCH)

Basically all of them!

Yes! I'll check with the Gigabyte app... Thanks.

[Geor9e]

Re: GA-H67MA-UD2H-B3 v1.1 (Bios F4) reporting strange values

Gigabyte util states +12v is on spec.

Worry mode :off: !

[wazza300]

Re: GA-H67MA-UD2H-B3 v1.1 (Bios F4) reporting strange values

I think its hw monitor,best to try a few programs and compare,try aida,I would only start worrying if it doesn't start up at all or crashes/reboots,then I would think about a better psu

[Lsdmeasap]

Re: GA-H67MA-UD2H-B3 v1.1 (Bios F4) reporting strange values

It's probably just that app has not been updated for your board yet, you can send in a report at their forum and hopefully he will add in compatibility on the next update.