Re: OC help with Q6600 on UD3R
only raised VCore for this test, going to run Prime95 for 8hours now, will get back to you tomorrow.
cores max temp was 69 degrees running linx
**EDIT**
ran prime95 blend for 8hours no errors =)
prime95 small FFT no errors in 2hours
cpuz is saying vcore is only at 1.328 , but i set it to 1.3500 in bios, should i lower it in bios settings as well?
only raised VCore for this test, going to run Prime95 for 8hours now, will get back to you tomorrow.
cores max temp was 69 degrees running linx
**EDIT**
ran prime95 blend for 8hours no errors =)
prime95 small FFT no errors in 2hours
cpuz is saying vcore is only at 1.328 , but i set it to 1.3500 in bios, should i lower it in bios settings as well?
Comment