Gigabyte UD3R Rev2 + timings

[ante]

[Lsdmeasap]

Re: Gigabyte UD3R Rev2 + timings

What CPU are you using?

So you're just having problems setting timings right? What are you trying to set them at?

You probably need more QPI/Vtt for sure (1.4-1.5), and IOH may help if you lower it instead of raise (Maybe 1.14)

Here is how to disable Auto restart on BSOD so it will stay on screen

[ante]

Re: Gigabyte UD3R Rev2 + timings

Problem solved. Hade to change one timing and raised IOH to 1.2. Rolling on now :)

[Lsdmeasap]

Re: Gigabyte UD3R Rev2 + timings

Nice to hear you are having some success now!

IOH 1.2 shouldn't be needed, did you try lower now that you adjusted that other setting (Maybe 1.14)?

[ante]

Re: Gigabyte UD3R Rev2 + timings

Nice when things work. I need to uncore clock to 20 , otherwise it wont boot. But will try lower ioh later. Maybe dont need that much like u say !

[Lsdmeasap]

Re: Gigabyte UD3R Rev2 + timings

You have uncore 20 in your first post, so I didn't even mention it :)

Ya you should be ok with less IOH voltage, good luck with the tweaking and testing!